Delphi EJBR04601D
common rail injector
1434988, 6C1Q-9K546-AB, 143498928239294L221PRD1600 bar peak rail pressureProduct Overview
The Delphi EJBR04601D is an authentic common rail diesel injector calibrated for Ford Transit V and Puma 2.4 TDCi engine applications. Operating at an engineered rail pressure of 1600 bar, this solenoid assembly features the precision 28239294 control valve and L221PRD nozzle. Mandatory ECU calibration requires programming the cylinder-specific C2i 16-digit hexadecimal code into the engine control unit to establish smooth delivery balance and Euro 4 emissions compliance. Typical failure symptoms include control valve erosion causing excessive back-leakage, rail pressure deficit (DTC P0087), and erratic cold-start idling. Overhauling necessitates clean room assembly and genuine replacement seals.
Verify Delphi C2i/C3i calibration code and OEM cross reference before installation.
Technical Specifications
| Specification | Value |
|---|---|
| SKU | EJBR04601D |
| Brand | DELPHI |
| Fuel System | Common Rail (Delphi DFI) |
| Operating PressureCore Spec | |
| Control ValveCore Spec | |
| Nozzle CodeCore Spec | |
| Hold Down Torque | 50 N·m |
| High-Pressure Line Torque | 47 N·m |
| Coding Required | Yes |
| Emission Standard | Euro 4 |
Installation Tips
- Depressurize And Clean: Depressurize the fuel system and isolate it according to the workshop procedure, then clean the surrounding area of the injector bore and the cylinder head before opening any connection.
- Disconnect Connections: Disconnect the electrical connector and the spill/return connection from the injector, then plug or cover all exposed ports and fittings to prevent dirt ingress.
- Remove High-Pressure Line: Remove the high-pressure line from the injector inlet, cap or plug the line and the injector port immediately, and keep the line ends clean.
- Extract Old Unit: Release and remove the hold-down device, extract the old injector from the bore, and remove any old seals without damaging the cylinder head or injector bore.
- Clean Bore And Seat: Clean the injector bore and seat in the cylinder head, remove carbon and debris, inspect the sealing surfaces, and keep the area covered until the new injector is ready.
- Fit Seals And Seat Unit: Fit new seals to the injector, seat the unit in the injector bore, tighten the hold-down to 50 N·m, then reconnect the high-pressure line and tighten it to 47 N·m; reconnect the electrical connector and spill connection.
- Calibration Coding: Record the 20-digit Delphi C2i/C3i calibration code and program it with a suitable diagnostic tool.
- Leak-Check And Start-Up: Leak-check the high-pressure line and injector connections, start the engine, and inspect for fuel leaks and abnormal running; stop the engine if any leak is found.
- Tighten the injector mounting/hold-down to 50 N·m.
- Tighten the high-pressure line to 47 N·m.
- Verify the old injector against EJBR04601D and cross references EJBR04701D, 1434988, 6C1Q-9K546-AB and 1434989 before ordering.
Frequently Asked Questions
How do I confirm EJBR04601D is the correct replacement for my old injector?
EJBR04601D is a common-rail diesel injector listed with cross references EJBR04701D, 1434988, 6C1Q-9K546-AB and 1434989. It is listed for Ford Transit V 2.4 TDCi (H9FB) (2006-2014) and Ford Transit V 2.2 TDCi (P8FA) (2006-2014), engine family Puma 2.4 TDCi, H9FB, JXFA. Confirm the old part number and vehicle fitment against the vehicle's EPC before ordering.
What torque values should I use for the injector hold-down and high-pressure line?
The listed mounting/hold-down torque is 50 N·m, and the high-pressure line torque is 47 N·m. The system pressure is listed as 1600 bar. Use these values and confirm any additional procedure against the vehicle's EPC.
What diagnostic trouble codes are listed for this injector?
The listed diagnostic trouble codes are P0300, P0087, P0201, P0204 and P0202. Specific symptoms of a failed unit are not stated in the supplied facts, so confirm the diagnosis against the vehicle's EPC.
Does this injector require coding or adaptation after fitting?
Coding or adaptation requirements are not stated in the supplied facts for EJBR04601D. Confirm coding/adaptation requirements against the vehicle's EPC before fitting.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.