Delphi EJBR04901D
common rail injector
A6640170121, 664017012128239294L224PRD1600 bar peak rail pressureProduct Overview
The Delphi EJBR04901D is an authentic common rail diesel injector calibrated for SsangYong Actyon Sports I and D20DT engine applications. Operating at an engineered rail pressure of 1600 bar, this solenoid assembly features the precision 28239294 control valve and L224PRD nozzle. Mandatory ECU calibration requires programming the cylinder-specific C2i 16-digit hexadecimal code into the engine control unit to establish smooth delivery balance and Euro 4 emissions compliance. Typical failure symptoms include control valve erosion causing excessive back-leakage, rail pressure deficit (DTC P0087), and erratic cold-start idling. Overhauling necessitates clean room assembly and genuine replacement seals.
Verify Delphi C2i/C3i calibration code and OEM cross reference before installation.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| SsangYong Actyon Sports I | 2.0 XDi (D20DT) | 2006-2012 |
Technical Specifications
| Specification | Value |
|---|---|
| SKU | EJBR04901D |
| Brand | DELPHI |
| Fuel System | Common Rail (Delphi DFI) |
| Operating PressureCore Spec | |
| Control ValveCore Spec | |
| Nozzle CodeCore Spec | |
| Hold Down Torque | 42 N·m |
| High-Pressure Line Torque | 40 N·m |
| Coding Required | Yes |
| Emission Standard | Euro 4 |
Installation Tips
- Depressurize And Clean: Depressurize the fuel system and isolate it according to the workshop procedure, then clean the surrounding area of the injector bore and the cylinder head before opening any connection.
- Disconnect Connections: Disconnect the electrical connector and the spill/return connection from the injector, then plug or cover all exposed ports and fittings to prevent dirt ingress.
- Remove High-Pressure Line: Remove the high-pressure line from the injector inlet, cap or plug the line and the injector port immediately, and keep the line ends clean.
- Extract Old Unit: Release and remove the hold-down device, extract the old injector from the bore, and remove any old seals without damaging the cylinder head or injector bore.
- Clean Bore And Seat: Clean the injector bore and seat in the cylinder head, remove carbon and debris, inspect the sealing surfaces, and keep the area covered until the new injector is ready.
- Fit Seals And Seat Unit: Fit new seals to the injector, seat the unit in the injector bore, tighten the hold-down to 42 N·m, then reconnect the high-pressure line and tighten it to 40 N·m; reconnect the electrical connector and spill connection.
- Calibration Coding: Record the 20-digit Delphi C2i/C3i calibration code and program it with a suitable diagnostic tool.
- Leak-Check And Start-Up: Leak-check the high-pressure line and injector connections, start the engine, and inspect for fuel leaks and abnormal running; stop the engine if any leak is found.
- Confirm EJBR04901D and D20DT fitment against the vehicle’s EPC before installation.
- Tighten the mounting/hold-down fastener to 42 N·m.
- Tighten the high-pressure line to 40 N·m.
Frequently Asked Questions
Will this common-rail diesel injector fit my SsangYong Actyon Sports I 2.0 XDi?
It is listed for the SsangYong Actyon Sports I 2.0 XDi (D20DT) from 2006-2012 and for the D20DT / Actyon D20DT engine family. Confirm the part number EJBR04901D against the vehicle’s EPC before ordering.
What are the system pressure and torque specifications?
The system pressure is 1600 bar. The mounting/hold-down torque is 42 N·m, and the high-pressure line torque is 40 N·m.
How do I verify the old injector and cross references?
The listed part number is EJBR04901D, with cross references EJBR04401D, A6640170121 and 6640170121. If the old part number is not readable, confirm fitment against the vehicle’s EPC.
Does this injector require coding or adaptation, and what DTCs are listed?
Coding or adaptation information is not stated in the verified facts, so it must be confirmed against the vehicle’s EPC rather than guessed. The listed diagnostic trouble codes are P0300, P0087, P0201, P0204 and P0202.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.