HITACHI 12639694
High Pressure Fuel Pump Chevy Equinox Malibu GMC Terrain Buick Regal 2.4L Ecotec LEA
12633494, 12633115, HPP0006, GDP102, HM10008, 12641847--150 bar peak rail pressureProduct Overview
The 12639694 is an original equipment (HITACHI) precision component engineered specifically for the GM 2.4L Ecotec SIDI DOHC 16V (LEA / LUK / LAF). Operating at peak injection pressures up to 150 bar (2175 psi), this unit delivers micro-metered fuel atomization required for high thermal efficiency, responsive low-end torque, and compliant tailpipe emissions. Common symptoms indicating component failure include rough idle shivering, extended cold-cranking intervals (5-10 seconds), unburned fuel odor in the engine oil, and active engine malfunction codes such as P0087, P0088, P053F, P0171.
Always verify the OE reference 12633494, 12633115, HPP0006, GDP102 stamped on your existing pump body before ordering; confirm the pump part number and drive coupling match your engine before unsealing the packaging. 12639694 needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number / SKU | 12639694 |
| Manufacturer Brand | HITACHI |
| Component Type | Mechanical High Pressure Fuel Pump (HPFP) |
| Engine Application | GM 2.4L Ecotec SIDI DOHC 16V (LEA / LUK / LAF) |
| Operating PressureCore Spec | |
| Mounting Torque (Flange / Bracket) | 13 N-m (115 lb-in) |
| Fuel Line / Rail Torque | 30 N-m (22 lb-ft) |
| Primary Diagnostic Fault Codes | P0087, P0088, P053F, P0171 |
Installation Tips
- Depressurize Fuel System: Pull fuel pump fuse or disconnect LPFP harness. Crank engine 5-8 seconds until it stalls to drop residual rail pressure below 5 bar.
- Clean Surrounding Cavity: Blow compressed air around cylinder head bore or pump flange cavity to prevent dirt ingress into the fuel rail.
- Lubricate & Fit Seals: Inspect Teflon combustion seals or O-rings. Coat lightly with clean motor oil (do not use grease) to avoid tearing during insertion.
- Torque to Factory Specification: Hand-thread bolts evenly. Tighten mounting fasteners to 13 N-m (115 lb-in), and torque fuel line fittings to 30 N-m (22 lb-ft).
- Prime & Leak Check: Cycle ignition to RUN position 3 times (5 seconds each) to build low-side pressure. Inspect fittings for leaks before starting engine.
- Confirm the engine code (LEA, LAF, or LUK) and model year against the vehicle's EPC before ordering part number 12639694.
- Tighten the pump mounting / hold-down fasteners to 13 N·m and the high-pressure line to 30 N·m.
- Use the listed cross references—12639694, 12633494, 12633115, HPP0006, GDP102, and HM10008—when checking the old part number.
Frequently Asked Questions
Will this high-pressure fuel pump fit my vehicle?
This pump is listed for the GM 2.4L Ecotec SIDI DOHC 16V engine family (LEA / LAF / LUK) in Chevrolet Equinox / Malibu / Impala / Captiva Sport [LEA, LAF, LUK] (2010-2017), GMC Terrain [LEA, LAF] (2010-2017), and Buick Regal / Verano / LaCrosse [LEA, LUK] (2010-2017). Confirm the exact model year and engine code against the vehicle's EPC before ordering part number 12639694.
What symptoms or diagnostic trouble codes are associated with this pump?
The verified facts do not state specific failure symptoms for this high-pressure fuel pump. The diagnostic trouble codes listed for this part are P0300, P0087, P0193, P0089, and P0191. Use those codes as diagnostic leads and confirm any repair procedure against the vehicle's EPC or service information.
What are the system pressure and torque specs for this pump?
The listed system pressure is 150 bar. The mounting / hold-down torque is 13 N·m, and the high-pressure line torque is 30 N·m.
Does this pump need coding or adaptation, can I reuse seals, and how do I verify the old part?
The verified facts do not state coding/adaptation requirements or whether seals can be reused; confirm those points against the vehicle's EPC or repair information instead of guessing. To verify the old part, compare part number 12639694 and the listed cross references: 12639694, 12633494, 12633115, HPP0006, GDP102, and HM10008.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.