HITACHI 12641740
High Pressure Fuel Pump Chevrolet Equinox Malibu Impala Buick Regal Verano 2.4L LEA 2.0L LHU HM10008 HPP0006
12608371, 12633423, HM10008, HPP0006, GDP103, 217-3440--150 bar peak rail pressureProduct Overview
The HITACHI 12641740 is a precision automotive OE replacement component engineered specifically for General Motors 2.4L Ecotec LEA & 2.0L Turbo LHU SIDI powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Verify part number 12641740 and application (Chevrolet Equinox/Malibu/Impala/Captiva Sport; GMC Terrain; Buick Regal/Verano/LaCrosse) before ordering; confirm the high-pressure pump and drive coupling match your engine before unsealing the packaging. This Continental VDO high-pressure common-rail pump raises rail pressure; system pressure is 150 bar.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 12641740 |
| oem_reference | 12641740 |
| manufacturer | HITACHI |
| system_type | High Pressure Fuel Pump |
| pressure_rating | 150 bar (2175 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 15 N-m (11 lb-ft) |
| high_pressure_line_torque | 30 N-m (22 lb-ft) |
| diagnostic_dtc | P0087, P0089, P0172, P0300 |
Installation Tips
- Depressurize the fuel system completely before disconnecting any high-pressure fuel lines.
- Clean the pump mounting area and fuel line connections to prevent contamination.
- Inspect the camshaft drive, timing belt/chain, or pump coupling for wear before installation.
- Fit the high-pressure pump using new seals and correct mounting hardware.
- Align the pump drive and coupling carefully without forcing the pump into place.
- Tighten the mounting fasteners and high-pressure line fittings to the manufacturer's specifications.
- Prime the fuel circuit using the specified procedure and check for leaks at all connections.
- Start the engine and recheck the high-pressure pump area for leaks before road test.
- Use new seals and keep the high-pressure pump and fuel connections clean during installation.
- The pump is driven by the timing belt/chain or camshaft; confirm the drive and coupling match the engine.
- Prime the fuel circuit and check for leaks before normal operation.
- Do not start the engine until the fuel circuit is primed and leak-free.
Frequently Asked Questions
Which vehicles and engine codes does this high-pressure fuel pump fit?
It is listed for Chevrolet Equinox/Malibu/Impala/Captiva Sport with LEA/LAF/LUK (2010-2017), GMC Terrain with LEA/LAF (2010-2017), and Buick Regal/Verano/LaCrosse with LEA/LUK (2010-2017). Confirm the exact engine code and model year against the vehicle’s EPC before ordering.
What fault codes or symptoms point to this gasoline direct-injection high-pressure fuel pump?
Specific symptoms are not stated in the listed facts; the listing references DTCs P0300, P0087, P0193, P0089, and P0191. Use those codes as diagnostic references and confirm the fault path and 150 bar system pressure with the vehicle’s service information.
What are the mounting and high-pressure line torque specs for this pump?
Mounting/hold-down torque is 15 N·m, and the high-pressure line torque is 30 N·m. Follow the vehicle’s service procedure and confirm any additional fastener or line requirements against the EPC/service information.
Does this pump need coding/adaptation, can the seals be reused, and how do I verify the old part?
Coding/adaptation and seal reuse are not stated in the listed facts, so they must be confirmed against the vehicle’s EPC/service information rather than assumed. To verify the old part, compare its part number and cross references: 12641740, 12608371, 12633423, HM10008, HPP0006, GDP103.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.