BOSCH BB5Z-9350-A
High Pressure Fuel Pump Ford Explorer Edge Escape Fusion Taurus 2.0L EcoBoost GDP1003
BB5E-9D376-AA, 0261520140, 0261520141, GDP1003, HM10006, HPP0006--200 bar peak rail pressureProduct Overview
The BOSCH BB5Z-9350-A is a precision automotive OE replacement component engineered specifically for Ford 2.0L EcoBoost DOHC Turbocharged I4 powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Verify the part number BB5Z-9350-A and Continental VDO marking on your original high-pressure fuel pump before ordering; confirm the pump body, drive coupling, and connection layout match your engine before unsealing the packaging.
Vehicle & Engine Fitment
Technical Specifications
| Specification | Value |
|---|---|
| part_number | BB5Z-9350-A |
| oem_reference | BB5Z-9350-A |
| manufacturer | BOSCH |
| system_type | High Pressure Fuel Pump |
| pressure_rating | 200 bar (2900 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 13 N-m (115 lb-in) |
| high_pressure_line_torque | 30 N-m (22 lb-ft) |
| diagnostic_dtc | P0087, P0088, P0171, P0300 |
Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)
Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.
Installation Tips
- Depressurize the fuel system completely before opening any high-pressure line.
- Clean the pump mounting area and line connections to prevent contamination.
- Remove the old high-pressure pump and inspect the drive arrangement.
- Fit the new high-pressure pump with new seals and correct engagement to the timing belt/chain or camshaft drive.
- Reconnect the high-pressure lines and low-pressure fuel connections.
- Prime the fuel circuit and check all connections for leaks.
- Start the engine and confirm rail pressure builds correctly.
- This high-pressure fuel pump raises rail pressure and is driven by the timing belt/chain or camshaft; always fit new seals, prime the fuel circuit, and check for leaks after installation.
- Keep the fuel system clean and confirm correct drive engagement before starting.
Frequently Asked Questions
What vehicles does this high-pressure fuel pump fit?
The listing lists fitment for Ford Mustang 2.3 EcoBoost (2015–2023), Ford Focus RS (2016–2018), and Ford Explorer 2.3 (2016–2023) under the Ford 2.0L & 2.3L EcoBoost DOHC 16V GTDI Twin-Scroll Turbo engine family. It is the BB5Z-9350-A gasoline direct-injection high-pressure fuel pump with 200 bar system pressure.
What diagnostic trouble codes are listed for this high-pressure fuel pump?
The listed diagnostic trouble codes are P0300, P0087, P0193, P0089, and P0191. Use these as diagnostic starting points and confirm the fault against the vehicle's EPC before replacing the pump.
What are the mounting and high-pressure line torques, and can I reuse the seals?
The mounting/hold-down torque is 13 N·m and the high-pressure line torque is 30 N·m. The supplied facts do not state whether the seals can be reused; confirm that against the vehicle's EPC. Do not guess any additional torque values.
How can I verify the old pump matches this listing?
The listed part number is BB5Z-9350-A, with cross references BB5Z9350A, BB5E9D376AA, 0261520140, 0261520141, GDP1003, and HM10006. Compare those numbers to the old unit and confirm against the vehicle's EPC if markings are unclear.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.