HITACHI 12658481
Direct Fuel Injector GM Malibu Equinox Regal Envision ATS CTS 2.0L Turbo LTG FJ1157
12643171, 12634125, 217-3443, FJ1157, FIJ0041--150 bar peak rail pressureProduct Overview
The HITACHI 12658481 is a factory precision fuel injection component engineered specifically for the GM 2.0L Turbocharged Ecotec Gen3 DOHC SIDI (LTG). Manufactured to strict original equipment tolerances, it delivers precise fuel atomization and operates up to its rated pressure of 150 bar (2175 psi). Common operational failure symptoms that point directly to this assembly include: Persistent Diagnostic Trouble Codes such as P0300, P0301, P0171, P0172 stored in the ECM. Hard cold starting, erratic idle oscillations, and severe acceleration stumbling. Unburnt fuel smell in the exhaust, black tailpipe soot, or fuel dilution in the engine crankcase. Loss of high-RPM power and engine protection limp-mode activation under highway load.
Always verify the OE reference 12643171, 12634125, 2173443, FJ1157 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 12658481 needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| sku | 12658481 |
| brand | HITACHI |
| manufacturer_code | 12658481 |
| pressure_rating | 150 bar (2175 psi) |
| torque_flange | 10 N-m (89 lb-in) |
| torque_line | 30 N-m (22 lb-ft) |
| engine_family | GM 2.0L Turbocharged Ecotec Gen3 DOHC SIDI (LTG) |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Always replace single-use high-pressure fuel lines and Teflon/copper sealing washers before installation.
- Lubricate the pump roller tappet or injector O-rings with clean engine oil before guiding into place.
- Tighten mounting flange fasteners in an even criss-cross pattern to 10 N-m (89 lb-in).
- Hand-thread fuel rail fittings first, then torque high-pressure flare nuts to 30 N-m (22 lb-ft) using a calibrated crowfoot wrench.
- Cycle the low-pressure fuel pump multiple times and perform a physical leak inspection before engine ignition.
- Confirm fitment and the listed cross references against the vehicle’s EPC before installation.
- Tighten the injector mounting/hold-down to 10 N·m and the high-pressure line to 30 N·m.
- Check for the listed DTCs P0300, P0301, P0087, P0302, and P0304 when diagnosing this gasoline direct-injection injector.
Frequently Asked Questions
Which engines and vehicles does part 12658481 fit?
Part 12658481 is a gasoline direct-injection injector for the GM 2.0L Ecotec Turbo SIDI engine family (LTG / LSY Tripower / LHU). Listed fitment is for LTG, LSY, and LHU applications: Cadillac ATS / ATS-L (2013-2019), Buick Regal (2014-2020), Buick Envision 28T AWD (2015-2020), and Chevrolet Camaro (2016-2020).
What are the installation torque values for this injector?
The injector mounting / hold-down torque is 10 N·m, and the high-pressure line torque is 30 N·m. The listed system pressure is 150 bar.
What diagnostic trouble codes are listed for this injector?
The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0304. No additional symptom details are provided in the verified facts, so confirm the diagnosis against the vehicle’s EPC instead of guessing.
What cross-reference part numbers can help verify the old injector?
The listed cross references are 12658481, 12643171, 12634125, 2173443, FJ1157, and FIJ0041. Compare these numbers with the old injector and confirm fitment against the vehicle’s EPC before replacement.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.