HITACHI 16790-5R1-004
High Pressure Fuel Pump Honda Fit Jazz Vezel HR V 1.5L Earth Dreams
16790-5R1-305, 296100-0080, GE190-025INTEGRATED ELECTROMAGNETIC SPILL VALVE SOLENOID-200 bar peak rail pressureProduct Overview
The 16790-5R1-004 is an industrial-grade genuine Tier-1 replacement engineered for Honda 1.5L Earth Dreams DOHC i-VTEC Direct Injection (L15B2, L15B3, L15Z). Designed for high-precision Honda Earth Dreams Gasoline Direct Injection (GDI), it delivers factory calibration standards, OE cross-reference compatibility, and verified workshop reliability.
Always verify the OE reference 167905R1305, 2961000080, GE190025 stamped on your existing pump body before ordering; confirm the pump part number and drive coupling match your engine before unsealing the packaging. 16790-5R1-004 needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Honda Fit GK5 1.5L | Honda 1.5L Earth Dreams VTEC Turbo & i-VTEC (L15B7 / L15BA / L15BE / L15B2) | 2015-2020 |
| Honda HR-V 1.5L | Honda 1.5L Earth Dreams VTEC Turbo & i-VTEC (L15B7 / L15BA / L15BE / L15B2) | 2016-2022 |
| Honda Vezel 1.5L | Honda 1.5L Earth Dreams VTEC Turbo & i-VTEC (L15B7 / L15BA / L15BE / L15B2) | 2015-2021 |
Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer | Hitachi Astemo / Honda Genuine Parts |
| Pump Construction | Single Plunger Mechanical Cam-Driven High Pressure Pump |
| Maximum System Pressure | 200 bar (20 MPa / 2900 psi) |
| Driving Element | Camshaft Follower Lifter Tappet on Exhaust Cam |
| Flange Fastener Tightening Torque | 12 N·m M6 Thread Bolts |
| High Pressure Pipe Joint Torque | 28 N·m Flare Nut |
| Diagnostic Fault Code | P0087 (Fuel Rail Pressure Insufficient), P0171 (Lean) |
| Common Symptom | Long engine crank time in the morning and ticking/rattling noise at idle |
| Operating PressureCore Spec |
Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)
Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.
Installation Tips
- Relieve Low Pressure Line Pressure: Remove fuel pump fuse from under-dash fuse panel. Crank engine for 5 seconds until it stalls, ensuring pressure in line drops to zero.
- Clean Mounting Pocket & Camshaft Tappet: Clean cylinder head pump well. Remove roller tappet, inspect for scoring, and lubricate thoroughly with molybdenum engine assembly grease.
- Position Camshaft at Low Base Circle: Rotate engine crankshaft clockwise until the high pressure pump driving cam lobe is at its lowest position to ease installation.
- Tighten Flange Bolts Alternately: Install pump with fresh engine oil applied to new O-ring. Tighten bolts alternately and evenly in two passes to final torque of 12 N·m.
- Torque High Pressure Line Flare Nut: Connect high pressure line and hand-tighten flare nut. Secure with flare nut wrench to 28 N·m. Start engine and verify zero fuel seepage.
- Verify part number 16790-5R1-004 and the listed cross references before installation.
- Torque the mounting/hold-down fasteners to 12 N·m.
- Torque the high-pressure line to 28 N·m for the 200 bar system.
Frequently Asked Questions
What causes long crank times on Honda Fit GK5 1.5L Earth Dreams?
Internal back-leakage past the high-pressure check valve allows fuel pressure in the rail to bleed off during parking. The engine requires prolonged cranking until the Hitachi pump rebuilds 200 bar operating pressure.
What noise does a worn 16790-5R1-004 pump make?
A worn internal damper or worn cam roller tappet produces a loud, rhythmic metallic ticking noise from the top of the cylinder head at idle speed.
What are the correct tightening torques?
Mounting flange bolts must be tightened to 12 N·m. The high pressure fuel pipe joint nut requires 28 N·m.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.