KEIHIN 16010-59B-315
Direct Fuel Injector Kit Honda Civic CR V Accord 1.5L Turbo Earth Dreams L15B7 L15BA FJ1326
16010-59B-305, FJ1326, 16450-5AA-A01--200 bar peak rail pressureProduct Overview
The KEIHIN 16010-59B-315 is a precision automotive OE replacement component engineered specifically for Honda 1.5L 4-Cylinder Turbo Earth Dreams DOHC (L15B7 / L15BA) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference 1601059B305, FJ1326, 164505AAA01 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 16010-59B-315 needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 16010-59B-315 |
| oem_reference | 16010-59B-315 |
| manufacturer | KEIHIN |
| system_type | Fuel Injector |
| pressure_rating | 200 bar (2900 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 12 N-m (106 lb-in) |
| high_pressure_line_torque | 28 N-m (21 lb-ft) |
| diagnostic_dtc | P0300, P0301, P0171, P0172 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 12 N-m (106 lb-in).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 28 N-m (21 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
Will this injector fit my 2018 Honda Accord 1.5 Turbo?
This gasoline direct-injection injector, part number 16010-59B-315, is listed for the Honda Accord X 1.5 Turbo with L15B7 / L15BA / L15BE / L15B2 engines from 2018 to 2022. It is also listed for Honda Civic X 1.5 Turbo (2016-2021) and Honda CR-V V 1.5 Turbo (2017-2022). Confirm exact fitment against the vehicle’s EPC.
What are the mounting and high-pressure line torque specs for this injector?
The mounting / hold-down torque is 12 N·m, and the high-pressure line torque is 28 N·m. The system pressure is 200 bar. Any torque or pressure value not stated here must be confirmed against the vehicle’s EPC.
Which diagnostic trouble codes are listed for this injector?
The diagnostic trouble codes listed for this gasoline direct-injection injector are P0300, P0301, P0087, P0302, and P0304. No other diagnostic trouble codes are stated in the verified facts.
How do I verify the old injector and cross-reference before ordering?
Check for part number 16010-59B-315 and the listed cross references: 1601059B315, 1601059B305, FJ1326, 164505AAA01, 160105PA305, and 160105R1315. The part is listed for the Honda 1.5L Earth Dreams VTEC Turbo & i-VTEC engine family L15B7 / L15BA / L15BE / L15B2. If the old part or EPC does not match these references, confirm fitment against the vehicle’s EPC.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.