KEIHIN 16010-5PA-305
High Pressure Fuel Injector Civic CR V Accord 1.5T Turbo L15B7 L15BE
06160-5PA-305HIGH-FREQUENCY SOLENOID ACTUATED MULTI-HOLE NOZZLE-200 bar peak rail pressureProduct Overview
The Honda 16010-5PA-305 is a Keihin multi-hole high-pressure gasoline direct injector for Honda 1.5L Earth Dreams VTEC Turbo and i-VTEC engines (L15B7 / L15BA / L15BE / L15B2). It is listed for the Civic X 1.5 Turbo (2016-2021), CR-V V 1.5 Turbo (2017-2022) and Accord X 1.5 Turbo (2018-2022). Rail pressure reaches 200 bar (20 MPa / 2900 psi) with a 6-hole spray pattern targeting the combustion chamber bowl and coil resistance of 1.8-2.2 Ω at 20°C. Flange mounting fasteners take 12 N·m and the high-pressure pipe flare nut 33 N·m. Common codes are P0300, P0301-P0304 and P0172. Inspect and replace the Teflon combustion seal ring and backup ring before re-inserting the injector into the cylinder head.
Always verify the OE reference 061605PA305 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 16010-5PA-305 needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Honda Civic X 1.5 Turbo | Honda 1.5L Earth Dreams VTEC Turbo & i-VTEC (L15B7 / L15BA / L15BE / L15B2) | 2016-2021 |
| Honda CR-V V 1.5 Turbo | Honda 1.5L Earth Dreams VTEC Turbo & i-VTEC (L15B7 / L15BA / L15BE / L15B2) | 2017-2022 |
| Honda Accord X 1.5 Turbo | Honda 1.5L Earth Dreams VTEC Turbo & i-VTEC (L15B7 / L15BA / L15BE / L15B2) | 2018-2022 |
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Keihin Multi-Hole High Pressure Gasoline Direct Injector |
| Operating PressureCore Spec | |
| Spray Pattern | 6-hole optimized spray pattern targeting combustion chamber bowl |
| Fuel Rail Bolt Torque | 12 N·m (flange mounting fasteners) |
| High Pressure Pipe Torque | 33 N·m Flare Nut Connection |
| Coil Resistance | 1.8 - 2.2 Ω at 20°C (Direct pulse driver circuit) |
| Common Fault Codes | P0300 (Random Misfire), P0301-P0304 (Cylinder Misfire), P0172 (Fuel System Rich) |
| Workshop Precaution | Inspect and replace Teflon combustion seal ring and backup ring before re-inserting into cylinder head |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Release Fuel Pressure & Remove Intake Piping: Disable fuel pump relay and crank engine to depressurize fuel lines. Detach intercooler charge pipes and intake air resonator.
- Disconnect Wiring Harness & Rail Bolts: Unplug injector electrical connectors. Remove the high pressure fuel rail mounting bolts (12 N·m) and steel line flare nut (33 N·m).
- Extract Injectors & Fit New Teflon O-Rings: Carefully remove injectors with puller tool. Fit new Teflon chamber seal using expansion cone and sizing collar.
- Seat Injectors, Torque Rail & Steel Fuel Line: Seat injectors into cylinder head. Tighten rail bolts to 12 N·m. Tighten high pressure line nut to 33 N·m. Check for fuel leaks on ignition cycle.
- Confirm part number 16010-5PA-305 and the listed engine/fitment against the vehicle's EPC before installation.
- Tighten the mounting / hold-down to 12 N·m and the high-pressure line to 33 N·m.
- Check diagnostic trouble codes P0300, P0301, P0302, P0304, and P0087 when diagnosing this gasoline direct-injection injector.
Frequently Asked Questions
Will this injector fit my Honda Civic X 1.5 Turbo?
This gasoline direct-injection injector, part number 16010-5PA-305, is listed for Honda Civic X 1.5 Turbo 2016-2021, Honda CR-V V 1.5 Turbo 2017-2022, and Honda Accord X 1.5 Turbo 2018-2022. It is for the Honda 1.5L Earth Dreams VTEC Turbo & i-VTEC engine family (L15B7 / L15BA / L15BE / L15B2). Confirm fitment against the vehicle's EPC before ordering.
What diagnostic trouble codes are listed for this injector?
The listed diagnostic trouble codes are P0300, P0301, P0302, P0304, and P0087. The supplied facts do not state a definitive injector-only symptom set beyond these codes. Confirm the diagnosis and vehicle application against the EPC before replacing the injector.
What are the mounting and high-pressure line torque values?
The mounting / hold-down torque is 12 N·m, and the high-pressure line torque is 33 N·m. The listed system pressure is 200 bar. Confirm the vehicle application against the EPC before using these values.
How can I verify the old part before ordering?
Use the listed part number 16010-5PA-305 and cross references 160105PA305, 061605PA305, 0261500162, 1601059B315, 160105A2A52, and 1679059B004. Confirm the old unit and vehicle fitment against the EPC before ordering. The supplied facts do not state additional verification procedures.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.