BOSCH A2700700587
High Pressure Fuel Injector Mercedes Benz C200 C300 E200 W205 W213 M270 M274 0261500065
2700700587, A2700700487, 0261500065, 0261500066HIGH-SPEED SOLENOID ACTUATED INWARD-OPENING MULTI-HOLE VALVE-200 bar peak rail pressureProduct Overview
The Bosch A2700700587 (Bosch 0261500065) is a Bosch HDEV5 solenoid multi-hole gasoline direct injector for Mercedes-Benz M270 and M274 1.6L / 2.0L BlueDIRECT turbo engines. It is listed for the C-Class W205 (2014-2021), E-Class W213 (2016-2021) and GLC300. Direct rail pressure is 200 bar (20 MPa / 2900 psi) with a precision multi-hole asymmetrical spray and coil resistance of 1.5-2.0 Ω at 20°C. Fuel rail clamping bolts take 14 N·m and the steel line flare nut 27 N·m. Common codes are P0300, P0301-P0304 and P0172. Mercedes special tool W270589010700 is used to size the new Teflon combustion chamber seal before cylinder head installation.
Always verify the OE reference 2700700587, A2700700487 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. A2700700587 needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Mercedes-Benz C-Class (W205) | Mercedes-Benz M270 / M274 (1.6L & 2.0L BlueDIRECT Turbo) | 2014-2018 |
| Mercedes-Benz C-Class (W205) | Mercedes-Benz M270 / M274 (1.6L & 2.0L BlueDIRECT Turbo) | 2015-2021 |
| Mercedes-Benz E-Class (W213) | Mercedes-Benz M270 / M274 (1.6L & 2.0L BlueDIRECT Turbo) | 2016-2021 |
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Bosch HDEV5 Solenoid Multi-Hole Gasoline Direct Injector |
| Operating PressureCore Spec | |
| Spray Pattern | Precision multi-hole asymmetrical optimized direct spray |
| Hold-down Torque | 14 N·m Fuel Rail Clamping Bolts📐 Torque & Angle Wizard → |
| High Pressure Pipe Torque | 27 N·m Steel Line Flare Nut |
| Coil Resistance | 1.5 - 2.0 Ω at 20°C (Direct peak-and-hold circuit) |
| Common Fault Codes | P0300 (Random Misfire), P0301-P0304 (Cylinder Misfire), P0172 (Mixture Too Rich) |
| Workshop Precaution | Use Mercedes special tool W270589010700 to size new Teflon combustion chamber seal before cylinder head installation |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize Rail & Remove Intake Manifold: Depressurize fuel system using Xentry scan tool or fuel pressure release valve. Remove intake manifold assembly.
- Detach High-Pressure Line & Rail Fasteners: Unscrew high pressure steel line union nuts (27 N·m). Remove fuel rail hold-down bolts (14 N·m) and wiring harness connectors.
- Pull Injectors & Replace Teflon Ring: Extract injectors vertically. Install new Teflon combustion ring with Mercedes installation cone tool W270589010700.
- Seat Rail, Torque Fasteners & Leak Test: Insert injectors into head. Torque rail bolts to 14 N·m. Tighten steel line to 27 N·m. Perform ignition cycle and check for leaks.
- Verify part number A2700700587 and the listed cross references against the vehicle’s EPC before installation.
- Tighten the injector mounting/hold-down to 14 N·m and the high-pressure line to 27 N·m.
- Confirm coding/adaptation and seal-reuse requirements against the vehicle’s EPC before fitting the injector.
Frequently Asked Questions
Will this injector fit my Mercedes-Benz C-Class or E-Class?
It is listed for Mercedes-Benz C-Class (W205) 2014-2018 and 2015-2021, and E-Class (W213) 2016-2021, with the M270/M274 1.6L & 2.0L BlueDIRECT Turbo engine family. Confirm the exact vehicle and engine fitment against the vehicle’s EPC.
What fault codes or symptoms point to this injector?
The supplied facts list diagnostic trouble codes P0300, P0301, P0087, P0302, and P0304 for this injector listing. No symptom description or service-life interval is stated, so confirm diagnosis against the vehicle’s EPC rather than guessing.
What are the mounting and high-pressure line torque values?
The mounting/hold-down torque is 14 N·m, and the high-pressure line torque is 27 N·m. The injector is specified for a 200 bar system pressure.
Do I need to code or adapt the injector, and can I reuse the seals?
The supplied facts do not state coding/adaptation requirements or seal reuse. Confirm those items against the vehicle’s EPC instead of guessing; the part number is A2700700587 and cross references include A2700700587, 2700700587, A2700700487, 0261500065, 0261500066, and 0261500162.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.