BOSCH A2740901429
High Pressure Fuel Pump Mercedes Benz C300 E300 GLC300 2.0T M274 M270 0261520215
2740901429, A2740900050, 2740900050, A2740900650, 2740900650, 0261520215, HPP0021--200 bar peak rail pressureProduct Overview
The BOSCH A2740901429 is a factory precision fuel injection component engineered specifically for the Mercedes-Benz 2.0L Turbocharged DOHC M274.920 / M270.920. Manufactured to strict original equipment tolerances, it delivers precise fuel atomization and operates up to its rated pressure of 200 bar (2900 psi). Common operational failure symptoms that point directly to this assembly include: Persistent Diagnostic Trouble Codes such as P0087, P0088, P0172, P053F stored in the ECM. Hard cold starting, erratic idle oscillations, and severe acceleration stumbling. Unburnt fuel smell in the exhaust, black tailpipe soot, or fuel dilution in the engine crankcase. Loss of high-RPM power and engine protection limp-mode activation under highway load.
Confirm part A2740901429 (Continental VDO) matches your Mercedes-Benz C-Class W205, E-Class W213, GLC-Class X253, or CLA-Class C117 with M270/M274 engine before ordering. This high-pressure common-rail pump has a 200 bar system pressure and must be fitted with new seals; prime the fuel circuit and check for leaks.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Mercedes-Benz C-Class (W205) | M270 / M274 | 2014-2020 |
| Mercedes-Benz E-Class (W213) | M270 / M274 | 2016-2020 |
| Mercedes-Benz GLC-Class (X253) | M270 / M274 | 2015-2020 |
| Mercedes-Benz CLA-Class (C117) | M270 / M274 | 2013-2019 |
Technical Specifications
| Specification | Value |
|---|---|
| sku | A2740901429 |
| brand | BOSCH |
| manufacturer_code | 0261520215 |
| pressure_rating | 200 bar (2900 psi) |
| torque_flange | 20 N-m (15 lb-ft) |
| torque_line | 27 N-m (20 lb-ft) |
| engine_family | Mercedes-Benz 2.0L Turbocharged DOHC M274.920 / M270.920 |
Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)
Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.
Installation Tips
- Confirm the replacement high-pressure pump matches the engine and drive arrangement before fitting.
- Clean the mounting area and keep all fuel circuit openings capped until connection.
- Fit the pump using new seals; do not reuse old seals.
- Align and engage the pump drive correctly with the timing belt/chain or camshaft drive.
- Prime the fuel circuit before starting the engine.
- Check all fuel connections for leaks after priming.
- Inspect the high-pressure pump area for leaks during initial running.
- Recheck the fuel circuit for leaks before returning the vehicle to service.
- The high-pressure pump raises rail pressure, so cleanliness is critical.
- Use new seals, keep open fuel connections capped, prime the fuel circuit, and check for leaks before and after initial running.
- Verify correct pump drive engagement.
Frequently Asked Questions
Will this high-pressure fuel pump fit my Mercedes-Benz?
This gasoline direct-injection high-pressure fuel pump, part number A2740901429, is listed for the Mercedes-Benz M270 / M274 1.6L & 2.0L BlueDIRECT Turbo engine family. Listed fitment is C-Class W205 2014-2020, E-Class W213 2016-2020, GLC-Class X253 2015-2020, and CLA-Class C117 2013-2019 with M270 or M274. Confirm the exact vehicle and engine against the vehicle’s EPC before ordering.
What pressure and torque specifications are listed for this pump?
The listed system pressure is 200 bar. The mounting / hold-down torque is 20 N·m, and the high-pressure line torque is 27 N·m. No other torque or pressure values are stated, so any additional specifications must be confirmed against the vehicle’s EPC.
What part numbers cross-reference with A2740901429?
The listed cross references are A2740901429, 2740901429, A2740900050, 2740900050, A2740900650, and 2740900650. Confirm the old part number against the vehicle’s EPC before replacement.
What diagnostic trouble codes are listed for this high-pressure fuel pump?
The listed diagnostic trouble codes are P0087, P0193, P0089, P0191, and P0088. If these codes are present, confirm the diagnosis against the vehicle’s EPC or service information before replacing the pump.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.