BOSCH 06M906036AD
High Pressure Fuel Injector Porsche Macan Cayenne Audi RS4 RS5 2.9T 3.0T EA839 0261500473
06M906036AA, 06M906036F, 0261500473LASER MICRO-ORIFICE FAST-RESPONSE ELECTROMAGNETIC SOLENOID-250 bar peak rail pressureProduct Overview
The Bosch 06M906036AD (Bosch 0261500473) is a Bosch HDEV5 250-bar multi-hole direct gasoline injector for Audi and Porsche EA839 2.9L BiTurbo and 3.0L V6 TFSI engines (CWGD / DECA). It is listed for the Porsche Macan GTS (2019-2024), Audi RS4 Avant B9 (2018-2024) and Porsche Cayenne PO536 (2018-2024). Common rail injection pressure reaches 250 bar (25 MPa / 3625 psi) with a spray pattern engineered for central-injector hot-V twin-turbo reverse-flow cylinder heads; coil resistance is 1.6-2.0 Ω at 20°C. Rail mounting screws take 10 N·m and the steel delivery line flare connection 28 N·m. Common codes are P0300, P0301-P0306 and P0172. Fit new Teflon tip seals with a calibration cone and clean carbon deposits from the injector bore before seating.
Always verify the OE reference 06M906036AA, 06M906036F stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 06M906036AD needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Porsche Macan GTS | Audi / Porsche EA839 (2.9L BiTurbo & 3.0L V6 Turbo TFSI CWGD / DECA) | 2019-2024 |
| Audi RS4 Avant B9 | Audi / Porsche EA839 (2.9L BiTurbo & 3.0L V6 Turbo TFSI CWGD / DECA) | 2018-2024 |
| Porsche Cayenne PO536 | Audi / Porsche EA839 (2.9L BiTurbo & 3.0L V6 Turbo TFSI CWGD / DECA) | 2018-2024 |
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Bosch HDEV5 250-bar Multi-Hole Direct Gasoline Fuel Injector |
| Operating PressureCore Spec | |
| Combustion Architecture | Engineered for central injector hot-V twin-turbo reverse-flow cylinder heads |
| Fuel Rail Bolt Torque | 10 N·m (rail mounting screws to cylinder head) |
| High Pressure Line Torque | 28 N·m (steel fuel delivery line flare connection) |
| Coil Resistance | 1.6 - 2.0 Ω at 20°C (rapid pulse inductive solenoid) |
| Common Fault Codes | P0300 (Random Misfire), P0301-P0306 (Cylinder Misfire), P0172 (System Too Rich Bank 1/2) |
| Workshop Precaution | Install new Teflon tip seals using calibration cone; clean injector bore carbon deposits before seating |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize Fuel System & Remove Hot-Vee Heat Shielding: Depressurize 250-bar circuit via VCDS/PIWIS scan tool. Remove intake air ducts and turbocharger hot-vee heat shield.
- Disconnect Injector Harness Plugs & Twin Delivery Rails: Unclip electrical harness connectors. Unscrew high pressure rail bolts (10 N·m) and ease delivery rail away from cylinder heads.
- Withdraw Direct Injectors & Calibrate New Teflon Radial Seals: Extract injectors using puller kit T10133C. Size fresh Teflon combustion chamber seal ring using assembly cone and sizing sleeve.
- Reinstall Rail Assembly & Torque Connections to Spec: Seat injectors square into cylinder head bores. Torque fuel rail bolts to 10 N·m. Tighten delivery line nuts to 28 N·m. Run engine and check for leaks.
- Confirm the listed fitment and Audi/Porsche EA839 engine-family application against the vehicle’s EPC before installing 06M906036AD.
- Tighten the injector mounting/hold-down to 10 N·m and the high-pressure line to 28 N·m.
- Use the listed DTCs P0300, P0301, P0302, P0304, and P0087 as diagnostic references, and confirm any unlisted procedure against the vehicle’s EPC.
Frequently Asked Questions
Which vehicles does part 06M906036AD fit?
Listed fitment is Porsche Macan GTS (2019–2024), Audi RS4 Avant B9 (2018–2024), and Porsche Cayenne PO536 (2018–2024) for the Audi/Porsche EA839 engine family, including the 2.9L BiTurbo and 3.0L V6 Turbo TFSI CWGD / DECA applications. Confirm any vehicle not explicitly listed against its EPC.
What diagnostic trouble codes are listed for this injector?
The listed diagnostic trouble codes are P0300, P0301, P0302, P0304, and P0087. Use these as the provided diagnostic-code reference for 06M906036AD and confirm any additional diagnosis against the vehicle’s EPC.
What torque values should I use for mounting and the high-pressure line?
Mounting/hold-down torque is 10 N·m, and high-pressure line torque is 28 N·m. The listed system pressure is 250 bar for this gasoline direct-injection injector. Confirm any procedure not stated here against the vehicle’s EPC.
How do I verify whether my old injector matches this listing?
Check the old injector against 06M906036AD and the listed cross references: 06M906036AA, 06M906036F, 0261500473, 06E906036E, and 06M906036P. If the marking is not one of these, confirm fitment against the vehicle’s EPC before ordering.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.