BOSCH 06K906036G
Direct Fuel Injector VW Golf GTI Passat Audi A4 A5 Q5 2.0T EA888 Gen3 0261500473
06K906036P, 0261500473, 0261500246, FJ1247, 842-12395--200 bar peak rail pressureProduct Overview
The BOSCH 06K906036G is a precision automotive OE replacement component engineered specifically for VW Audi 2.0T EA888 Gen3 TSI / TFSI DOHC Turbo powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference 06K906036P, FJ1247, 84212395 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 06K906036G needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Volkswagen Golf Mk7/Mk7.5 | CHHB / CJXC / CYFB | 2013-2020 |
| Audi S3 (8V) / TTS (8S) | CHHB / CJXC / CYFB | 2014-2020 |
| Audi A4 (B9) / A5 (F5) / Q5 (FY) | CHHB / CJXC / CYFB | 2016-2021 |
| Porsche Macan | CHHB / CJXC / CYFB | 2015-2021 |
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 06K906036G |
| oem_reference | 06K906036G |
| manufacturer | BOSCH |
| system_type | Fuel Injector |
| pressure_rating | 200 bar (2900 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 10 N-m (89 lb-in) |
| high_pressure_line_torque | 27 N-m (20 lb-ft) |
| diagnostic_dtc | P0300, P0301, P0171, P0172 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 10 N-m (89 lb-in).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 27 N-m (20 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
Will 06K906036G fit my vehicle?
It is a gasoline direct-injection injector listed for the Volkswagen, Audi and Porsche TSI/TFSI applications shown in the fitment data; confirm your engine code against the vehicle's EPC before ordering 06K906036G.
What symptoms indicate a failed injector?
The supplied data does not list failure symptoms; confirm diagnosis against the vehicle's workshop manual before replacing 06K906036G.
What should I check before ordering?
Confirm the engine code and original injector part number against the EPC, inspect the connector and rail fitment, and verify 06K906036G is the correct replacement.
Must the new injector be coded or adapted?
Coding or adaptation requirements are not stated in the supplied data; confirm whether matching is required in the vehicle's workshop manual before fitting 06K906036G.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.