DENSO 23209-24010
High Pressure Fuel Injector Toyota RAV4 Camry Corolla Lexus ES200 2.0L M20A FKS D 4S
23290-24010, 297500-0120HIGH-SPEED SOLENOID ACTUATED MULTI-HOLE DIRECT INJECTION NOZZLE-200 bar peak rail pressureProduct Overview
The Denso 23209-24010 is a multi-hole high-pressure direct gasoline injector for Toyota and Lexus 2.0L Dynamic Force D-4S engines (M20A-FKS). It is listed for the RAV4 V 2.0L (2019-2024), Camry VIII 2.0L (2018-2024) and Lexus ES 200 2.0L (2019-2024). Direct rail injection pressure is 200 bar (20 MPa / 2900 psi), with a 6-hole high-atomization direct combustion spray and coil resistance of 1.7-2.1 Ω at 20°C. Fuel rail clamping bolts take 21 N·m and the steel line flare nut 32 N·m. Common codes are P0300, P0301-P0304 and P0171. Upper O-rings should be lubricated with clean engine oil and a new Teflon combustion seal ring fitted before mounting.
Always verify the OE reference 2329024010, 2975000120 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 23209-24010 needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Toyota RAV4 V 2.0L | Toyota / Lexus 2.0L & 2.5L Dynamic Force D-4S (A25A-FKS / A25A-FXS / M20A-FKS) | 2019-2024 |
| Toyota Camry VIII 2.0L | Toyota / Lexus 2.0L & 2.5L Dynamic Force D-4S (A25A-FKS / A25A-FXS / M20A-FKS) | 2018-2024 |
| Lexus ES 200 2.0L | Toyota / Lexus 2.0L & 2.5L Dynamic Force D-4S (A25A-FKS / A25A-FXS / M20A-FKS) | 2019-2024 |
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Denso Multi-Hole High Pressure Direct Gasoline Injector |
| Operating PressureCore Spec | |
| Spray Pattern | 6-hole optimized high-atomization direct combustion spray |
| Hold-down Torque | 21 N·m Fuel Rail Clamping Bolts📐 Torque & Angle Wizard → |
| High Pressure Pipe Torque | 32 N·m Steel Line Flare Nut |
| Coil Resistance | 1.7 - 2.1 Ω at 20°C (Direct peak-and-hold circuit) |
| Common Fault Codes | P0300 (Random Misfire), P0301-P0304 (Cylinder Misfire), P0171 (System Lean) |
| Workshop Precaution | Always lubricate upper O-rings with clean engine oil and install new Teflon combustion seal ring before mounting |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize Fuel Rail & Remove Engine Cover: Depressurize fuel line using Toyota Techstream scan tool or fuel pump fuse removal. Remove engine beauty cover.
- Disconnect High-Pressure Delivery Pipe: Loosen steel fuel line union nuts (32 N·m). Detach direct injector wiring connectors and clamp retaining bolts (21 N·m).
- Extract Injectors & Replace Teflon Seals: Carefully remove direct injectors from cylinder head ports. Install new Teflon seals using SST expander and sizing tool.
- Torque Retaining Bolts & Reconnect Steel Pipe: Press injectors firmly into head. Tighten rail clamp bolts to 21 N·m. Tighten high pressure pipe to 32 N·m. Verify zero leaks upon engine start.
- Confirm the vehicle's engine family and listed fitment against its EPC before ordering.
- Tighten the injector mounting/hold-down to 21 N·m and the high-pressure line to 32 N·m.
- Verify the old injector's part number against 23209-24010 and the listed cross references before replacement.
Frequently Asked Questions
Will this injector fit my Toyota RAV4, Camry, or Lexus ES 200?
This gasoline direct-injection injector, part number 23209-24010, is listed for the Toyota/Lexus 2.0L and 2.5L Dynamic Force D-4S engine family (A25A-FKS / A25A-FXS / M20A-FKS). Listed fitment is Toyota RAV4 V 2.0L 2019-2024, Toyota Camry VIII 2.0L 2018-2024, and Lexus ES 200 2.0L 2019-2024. For any other vehicle, confirm fitment against the vehicle's EPC before ordering.
What diagnostic trouble codes are associated with this injector?
The verified diagnostic trouble codes for this listing are P0300, P0301, P0087, P0302, and P0304. No further symptom list is stated in the verified facts, so do not infer additional symptoms beyond these codes.
Does this injector require coding/adaptation or new seals?
Coding/adaptation requirements and seal reuse are not stated in the verified facts. Confirm the required procedure against the vehicle's EPC before installation.
How can I verify the old injector before replacing it?
Compare the old injector's part number with 23209-24010 and the listed cross references: 2320924010, 2329024010, 2975000120, 0261500162, 16611AA810, and 167905R1004. If the old number or application is not covered by these verified references, confirm against the vehicle's EPC before ordering.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.