DENSO 23209-31110
Direct Fuel Injector Toyota Tacoma Highlander Sienna Lexus RX350 3.5L V6 D 4S 2GR FKS FJ1248
23250-31110, FJ1248, 842-12384--200 bar peak rail pressureProduct Overview
The DENSO 23209-31110 is a precision automotive OE replacement component engineered specifically for Toyota 3.5L V6 DOHC Dual VVT-i D-4S (2GR-FKS) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference 2325031110, FJ1248, 84212384 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 23209-31110 needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 23209-31110 |
| oem_reference | 23209-31110 |
| manufacturer | DENSO |
| system_type | Fuel Injector |
| pressure_rating | 200 bar (2900 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 10 N-m (89 lb-in) |
| high_pressure_line_torque | 25 N-m (18 lb-ft) |
| diagnostic_dtc | P0300, P0301, P0171, P0174 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 10 N-m (89 lb-in).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 25 N-m (18 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
Will this injector fit a Toyota Tacoma 3.5L?
Part number 23209-31110 is listed for Toyota Tacoma N300 with 2GR-FKS, 2GR-FXS, or 2GR-FE engines from 2016-2023. It is also listed for Toyota Highlander XU50 (2017-2022) and Lexus RX350 AL20 (2016-2022) with the same engine family. Confirm your exact engine code and model year against the vehicle's EPC before ordering.
What diagnostic trouble codes are associated with this injector?
The listed diagnostic trouble codes for this gasoline direct-injection injector are P0300, P0301, P0087, P0302, and P0304. Use these codes as part of diagnosis, but confirm the fault and repair path for the specific vehicle before replacing parts.
What are the mounting and high-pressure line torque specs?
The mounting/hold-down torque is 10 N·m, and the high-pressure line torque is 25 N·m. This injector is used in a system with 200 bar pressure. Follow the vehicle-specific service procedure for installation.
How can I verify the old injector part number before ordering?
Check the old unit for part number 23209-31110 and compare it with these listed cross references: 2320931110, 2325031110, FJ1248, 84212384, 231000P040, and 232090P010. If the markings are not readable or do not match, confirm fitment by VIN and the vehicle's EPC before ordering.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.