DENSO 23209-36010
Direct Fuel Injector Toyota Highlander Crown Lexus NX200t RX200t 2.0T 8AR FTS D 4ST FJ1202
23209-39215, FJ1202, 842-12375--200 bar peak rail pressureProduct Overview
The DENSO 23209-36010 is a precision automotive OE replacement component engineered specifically for Toyota Lexus 2.0T 4-Cylinder D-4ST Turbo (8AR-FTS) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference 2320939215, FJ1202, 84212375 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 23209-36010 needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 23209-36010 |
| oem_reference | 23209-36010 |
| manufacturer | DENSO |
| system_type | Fuel Injector |
| pressure_rating | 200 bar (2900 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 12 N-m (106 lb-in) |
| high_pressure_line_torque | 29 N-m (21 lb-ft) |
| diagnostic_dtc | P0300, P0301, P0171, P0172 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 12 N-m (106 lb-in).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 29 N-m (21 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
Which vehicles does part number 23209-36010 fit?
It is a gasoline direct-injection injector for the Toyota/Lexus 2.0L Turbo 8AR-FTS D-4ST DOHC 16V engine family. Listed fitment includes Toyota Highlander 8AR-FTS 2015-2021, Toyota Crown S210 8AR-FTS 2015-2020, Lexus RX AL20 8AR-FTS 2015-2022, and Lexus NX AZ10 8AR-FTS 2014-2021. Confirm the exact application against the vehicle’s EPC before ordering.
Which diagnostic trouble codes are listed for this injector?
The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0304. Use these as diagnostic leads only and confirm the fault and part application against the vehicle’s EPC before replacing parts.
What torque values are specified for installing this injector?
The mounting/hold-down torque is 12 N·m, and the high-pressure line torque is 29 N·m. The system pressure listed is 200 bar.
How can I verify the old injector before ordering?
Compare the old unit with part number 23209-36010 and the listed cross references: 2320936010, 2320939215, FJ1202, 84212375, 231000T020, and 2310036010. If the markings or application do not match, confirm fitment against the vehicle’s EPC instead of guessing.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.