Catalog / BOSCH / 31405791
BOSCH

BOSCH 31405791

View Specs
SolenoidGDI High-Pressure Fuel Pump (HPFP)Euro 6

High Pressure Fuel Pump Volvo XC90 XC60 S90 V90 V60 2.0T Drive E T5 T6 B4204T 0261520268

Reference data for BOSCH 31405791 high-pressure fuel pump · OEM 31375481, 31478293, 31478294, 0261520268, GDP607, HM10052 · Application Volvo 2.0L Drive-E Turbo & Twin-Charged (B4204T / T5 / T6 / T8)
OE REFERENCE31375481, 31478293, 31478294, 0261520268, GDP607, HM10052
CONTROL VALVE-
NOZZLE-
EMISSIONEuro 6
WARRANTY12 Months
01

Product Overview

The BOSCH 31405791 is a factory precision fuel injection component engineered specifically for the Volvo 2.0L Drive-E Turbo / Twincharged DOHC 16V B4204T (T5 / T6). Manufactured to strict original equipment tolerances, it delivers precise fuel atomization and operates up to its rated pressure of 200 bar (2900 psi). Common operational failure symptoms that point directly to this assembly include: Persistent Diagnostic Trouble Codes such as P0087, P0088, P0171, P053F stored in the ECM. Hard cold starting, erratic idle oscillations, and severe acceleration stumbling. Unburnt fuel smell in the exhaust, black tailpipe soot, or fuel dilution in the engine crankcase. Loss of high-RPM power and engine protection limp-mode activation under highway load.

Before You Order

Before ordering, verify the pump part number 31405791 and that it matches the listed Volvo B4204T application and drive type; this Continental VDO high-pressure common-rail pump is listed with 200 bar system pressure.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

Primary
OEM Ref
03

Vehicle & Engine Fitment

VehicleEngineYears
Volvo XC90 IIB4204T2016-2024
Volvo XC60 IIB4204T2018-2024
Volvo S90 IIB4204T2017-2024
04

Technical Specifications

SpecificationValue
sku31405791
brandBOSCH
manufacturer_code0261520268
pressure_rating200 bar (2900 psi)
torque_flange20 N-m (15 lb-ft)
torque_line28 N-m (21 lb-ft)
engine_familyVolvo 2.0L Drive-E Turbo / Twincharged DOHC 16V B4204T (T5 / T6)

Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)

Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.

DENSOExact Engine & Chassis Match
31303495
Gasoline Direct Injection (GDI) • 200 bar
🚙 Volvo S90 Ii (B4204T)
Technical Specifications & Pinout
05

Installation Tips

  1. Install the high-pressure pump with new seals and correct drive engagement.
  2. Verify the timing belt/chain or camshaft drive alignment before final tightening.
  3. Prime the fuel circuit before cranking the engine.
  4. Check all pump and high-pressure line connections for leaks.
  5. Start the engine and confirm rail pressure builds correctly.
  6. Inspect for fuel seepage after initial running.
  7. Recheck the fuel circuit for leaks and correct any seepage.
Tips & Warnings:
  • Fit new seals every time; keep the fuel system clean; ensure the pump drive is properly engaged; prime the fuel circuit and check for leaks before and after start-up.
  • Do not reuse seals or allow contamination into the high-pressure circuit.
06

Frequently Asked Questions

QWill this high-pressure fuel pump fit my Volvo?

It is listed for the Volvo 2.0L Drive-E Turbo & Twin-Charged engine family (B4204T / T5 / T6 / T8), including Volvo XC90 II B4204T 2016-2024, Volvo XC60 II B4204T 2018-2024, and Volvo S90 II B4204T 2017-2024. Confirm your exact model, year, and engine against the vehicle's EPC before ordering.

QWhat fault codes are listed for this gasoline direct-injection high-pressure fuel pump?

The listed diagnostic trouble codes are P0087, P0193, P0089, P0191, and P0088. Use those codes with proper diagnostics; the listing does not provide a symptom chart.

QWhat are the mounting and high-pressure line torque specs?

The mounting / hold-down torque is 20 N·m, and the high-pressure line torque is 28 N·m. The listed system pressure for this pump is 200 bar.

QHow can I verify the old part or find a cross-reference?

The part number is 31405791, and the listed cross references are 31405791, 31375481, 31478293, 31478294, 0261520268, and GDP607. Match those numbers and confirm fitment against the vehicle's EPC before installation.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0088Critical

Fuel Rail/System Pressure Too High

P0089Critical

Fuel Pressure Regulator 1 Performance

P0191Critical

Fuel Rail Pressure Sensor 'A' Circuit Range/Performance

P0002High

Fuel Volume Regulator Control Circuit Range / Performance (VCV / IMV)

P0090High

Fuel Pressure Regulator 1 Control Circuit

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

COMMON RAIL WORKSHOP DIAGNOSTICS

Common Rail High-Pressure Pump Diagnostics Guide

Diagnose common rail high-pressure pump failure: suction vacuum, CP4 roller glitter, plunger wear, air ingress & P0087 hard start. Workshop bench testing.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Fuel Metering Valve (IMV/SCV) Diagnostics Guide

Diagnostic guide for common rail fuel metering valves (IMV/SCV/FCA/MPROP). Normally open vs closed, coil resistance, PWM duty cycle & P0088 / P0089 test.

Read Technical Protocol
OBD-II DIAGNOSTIC PROTOCOL

P0087 Low Rail Pressure Diagnosis Guide

Step-by-step workshop diagnostic protocol for OBD-II DTC P0087 (Fuel Rail Pressure Too Low). 5-stage troubleshooting tree: backleak testing, SCV valve, PRV valve, and high-pressure pump.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Rail Pressure Relief Valve Diagnostics Guide

Common rail pressure relief valve (PRV) testing guide. Diagnose hot start stalls, P0087 rail pressure loss, return line leakage & single vs 2-stage valves.

Read Technical Protocol