BOSCH 06E906036AF
High Pressure Fuel Injector Audi S4 S5 A6 A7 A8 Q7 SQ5 3.0T V6 Supercharged EA837 0261500043 FJ1049
06E906036C, 0261500043, 0261500044, FJ1049--150 bar peak rail pressureProduct Overview
The BOSCH 06E906036AF is a precision automotive OE replacement component engineered specifically for Audi 3.0T V6 Supercharged DOHC 24V EA837 (CTUB, CGWA, CGWB, CREC) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference 06E906036C, FJ1049 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 06E906036AF needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 06E906036AF |
| oem_reference | 06E906036AF |
| manufacturer | BOSCH |
| system_type | Fuel Injector |
| pressure_rating | 150 bar (2175 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 9 N-m (80 lb-in) |
| high_pressure_line_torque | 25 N-m (18 lb-ft) |
| diagnostic_dtc | P0300, P0301, P0172, P0175 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 9 N-m (80 lb-in).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 25 N-m (18 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
Will this 06E906036AF injector fit my Audi or Porsche 3.0L V6?
It is listed for the Audi/VW/Porsche EA837 3.0L V6 Supercharged TFSI engine family with codes CGWB, CTUB, and CREC. Fitment includes Audi S4/S5 (B8/B8.5) 2010-2017, Audi A6 (C7)/A7 (4G8) 2012-2018, Audi Q7 (4L)/SQ5 (8R) 2011-2017, and Porsche Cayenne/Panamera 2011-2018. Confirm your exact engine code and vehicle fitment against the vehicle’s EPC before ordering.
What fault codes or symptoms are listed for this injector?
The supplied facts list DTCs P0300, P0301, P0087, P0302, and P0304 for this injector listing. Specific symptoms are not stated in the supplied facts and must be confirmed against the vehicle’s EPC instead of guessing.
What are the torque specs for installing this gasoline direct-injection injector?
For 06E906036AF, the mounting/hold-down torque is 9 N·m and the high-pressure line torque is 25 N·m. This gasoline direct-injection injector is listed with a system pressure of 150 bar. Confirm any additional installation details against the vehicle’s EPC.
How can I verify the old injector and cross-reference it before buying?
Check the old unit for part number 06E906036AF and compare it with the listed cross references: 06E906036AF, 06E906036C, 0261500043, 0261500044, FJ1049, and 06E127025AB. The listing identifies the component as a gasoline direct-injection injector for the EA837 3.0L V6 Supercharged TFSI family. If the number or engine code is unclear, confirm against the vehicle’s EPC before ordering.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.