BOSCH 06E906036E
Direct Fuel Injector Audi S4 S5 A6 A7 A8 Q7 SQ5 Porsche Cayenne 3.0 TFSI Supercharged EA837 0261500076
0261500076, 0261500077, 06E906036CHIGH-PRESSURE SOLENOID ACTUATED MULTI-HOLE NOZZLE-150 bar peak rail pressureProduct Overview
The BOSCH 06E906036E is an OEM Tier-1 precision-engineered fuel system component built to strict factory tolerances. Engineered for modern high-performance gasoline engines, this component delivers precise fuel metering, maintains stable fuel rail pressure, and mitigates cold-start misfire, engine oil dilution, and acceleration hesitation under demanding driving conditions.
Always verify the OE reference 06E906036C stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 06E906036E needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Bosch HDEV 5.1 150-bar Gasoline Direct Injection (FSI/TFSI) |
| Operating PressureCore Spec | |
| Spray Pattern | Multi-Hole Laser-Drilled Asymmetrical Spray Pattern |
| Injector Hold-Down Bolt Torque | 10 N·m (89 in-lb) direct fuel rail clamping bolts📐 Torque & Angle Wizard → |
| Fuel Line Nut Torque | 27 N·m (20 lb-ft) high-pressure steel line flare nut |
| Combustion Seal | Teflon (PTFE) Ring with Support Spacer & O-Ring |
| Fuel Injection Technology | Bosch HDEV 5.1 Solenoid Direct Fuel Injector |
| Manufacturer | Bosch (OEM for Audi, VW & Porsche) |
| Bosch Production Number | 0261500076 / 0261500077 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Fuel System Depressurization & Coolant Safety: Depressurize fuel lines via diagnostic scan tool or fuse removal. Drain supercharger intercooler coolant circuits partially, as supercharger assembly must be unbolted to access fuel rails.
- Supercharger (Roots-Type Blower) Assembly Removal: Disconnect drive belt, bypass valve electrical connections, vacuum lines, and supercharger perimeter bolts. Carefully lift the Roots-type supercharger unit from the engine V-valley.
- Lower Intake Manifold Runner & Fuel Rail Disconnection: Disconnect high-pressure rail crossover pipes (27 N·m flare nut). Unplug individual direct injector electrical harnesses and unbolt fuel rail mounting hardware (10 N·m).
- Injector Extraction & Intake Valve Carbon Cleaning: Use a slide hammer puller kit (T10133) to extract stubborn injectors smoothly. Inspect intake valves for heavy carbon build-up; perform walnut shell blasting if necessary before new injector installation.
- Teflon Seal Protection & Injector Rail Reassembly: Clean cylinder head injector pockets. Do not lubricate Teflon seals. Install new injectors with proper support clips into fuel rail, seat into cylinder head bores, and torque rail bolts progressively to 10 N·m.
- Fuel Line Reconnection, Supercharger Installation & Pressure Test: Reinstall high-pressure fuel lines and torque flare nuts to 27 N·m. Replace supercharger green intake port gaskets, reinstall supercharger, bleed intercooler coolant, and verify zero fuel leaks under 150-bar rail pressure.
- Confirm the exact engine code and application against the EPC before ordering.
- Torque the injector hold-down to 10 N·m and the high-pressure line to 27 N·m.
- Verify the old injector part number or listed cross reference before replacing it.
Frequently Asked Questions
Will this injector fit my Audi S4 B8/B8.5 3.0 TFSI Supercharged EA837?
It is listed for Audi S4 (B8/B8.5) 3.0 TFSI Supercharged EA837 (2010-2016), Audi A6 (C7) 3.0 TFSI Supercharged EA837 (2012-2018), Audi Q7 (4L) 3.0 TFSI Supercharged EA837 (2011-2015), and Porsche Cayenne (92A) 3.0L Supercharged V6 + Hybrid (2011-2018). The cross references are 06E906036E, 0261500076, 0261500077, 06E906036C, 0261500162, and 06E127025AB. Confirm the exact vehicle application against the EPC.
What diagnostic trouble codes are associated with this injector listing?
The verified diagnostic trouble codes for this listing are P0300, P0301, P0087, P0302, and P0304. The listing does not state additional symptom details beyond these codes.
What are the mounting/hold-down and high-pressure line torque specs, and what system pressure does this injector use?
The mounting/hold-down torque is 10 N·m, and the high-pressure line torque is 27 N·m. The system pressure is 150 bar.
Does this injector require coding or adaptation, and can the seals be reused?
The provided facts do not state coding/adaptation requirements or seal reuse; both must be confirmed against the vehicle's EPC before installation. This is a gasoline direct-injection injector for the EA837 3.0L V6 Supercharged TFSI (CGWB / CTUB / CREC).
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.