Catalog / DELPHI / 28231014
DELPHI

Delphi 28231014

View Specs
SolenoidDelphi Common Rail SystemEuro 4

common rail injector

Reference data for DELPHI 28231014 common rail injector · OEM 1112100-ED01 · Application GW4D20, 2.0 VGT 绿静
OE REFERENCE1112100-ED01
CONTROL VALVE28239294
NOZZLEG374
EMISSIONEuro 4
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The Delphi 28231014 is an authentic common rail diesel injector calibrated for Great Wall Haval H5 and GW4D20 engine applications. Operating at an engineered rail pressure of 1800 bar, this solenoid assembly features the precision 28239294 control valve and G374 nozzle. Mandatory ECU calibration requires programming the cylinder-specific C3i 20-digit code into the engine control unit to establish smooth delivery balance and Euro 4 emissions compliance. Typical failure symptoms include control valve erosion causing excessive back-leakage, rail pressure deficit (DTC P0087), and erratic cold-start idling. Overhauling necessitates clean room assembly and genuine replacement seals.

Before You Order

Verify Delphi C2i/C3i calibration code and OEM cross reference before installation.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

OEM Ref
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Great Wall Haval H52.0 VGT Diesel (GW4D20)2010-2018
Great Wall Wingle 52.0 TCi (GW4D20)2011-2019
Haval H6 I2.0 TDI (GW4D20)2011-2017
04

Technical Specifications

SpecificationValue
SKU28231014
BrandDELPHI
Fuel SystemCommon Rail (Delphi DFI)
Operating PressureCore Spec
Control ValveCore Spec
🔗 Shared Valve (40 assemblies):2823224128232242EJBR05701DEMBR00201D
Nozzle CodeCore Spec
🔗 Shared Nozzle (7 assemblies):282322412823224828342997EMBR00001D
Hold Down Torque35 N·m
High-Pressure Line Torque32 N·m
Coding RequiredYes
Emission StandardEuro 4
05

Installation Tips

  1. Depressurize And Clean: Depressurize the fuel system and isolate it according to the workshop procedure, then clean the surrounding area of the injector bore and the cylinder head before opening any connection.
  2. Disconnect Connections: Disconnect the electrical connector and the spill/return connection from the injector, then plug or cover all exposed ports and fittings to prevent dirt ingress.
  3. Remove High-Pressure Line: Remove the high-pressure line from the injector inlet, cap or plug the line and the injector port immediately, and keep the line ends clean.
  4. Extract Old Unit: Release and remove the hold-down device, extract the old injector from the bore, and remove any old seals without damaging the cylinder head or injector bore.
  5. Clean Bore And Seat: Clean the injector bore and seat in the cylinder head, remove carbon and debris, inspect the sealing surfaces, and keep the area covered until the new injector is ready.
  6. Fit Seals And Seat Unit: Fit new seals to the injector, seat the unit in the injector bore, tighten the hold-down to 35 N·m, then reconnect the high-pressure line and tighten it to 32 N·m; reconnect the electrical connector and spill connection.
  7. Calibration Coding: Record the 20-digit Delphi C2i/C3i calibration code and program it with a suitable diagnostic tool.
  8. Leak-Check And Start-Up: Leak-check the high-pressure line and injector connections, start the engine, and inspect for fuel leaks and abnormal running; stop the engine if any leak is found.
Tips & Warnings:
  • Tighten the injector mounting/hold-down to 35 N·m.
  • Tighten the high-pressure line to 32 N·m.
  • Verify part number 28231014 and cross references 28236382 and 1112100-ED01 against the vehicle’s EPC before installation.
06

Frequently Asked Questions

QHow can I verify that part 28231014 fits my vehicle and matches the old injector?

Part 28231014 is listed for the Great Wall Haval H5 2.0 VGT Diesel (GW4D20) 2010-2018, Great Wall Wingle 5 2.0 TCi (GW4D20) 2011-2019, and Haval H6 I 2.0 TDI (GW4D20) 2011-2017. Its listed cross references are 28236382 and 1112100-ED01. Confirm the final match against the vehicle’s EPC before ordering or installing.

QWhat system pressure and tightening torques are specified for this injector?

This common-rail diesel injector is listed for 1800 bar system pressure. Tighten the mounting/hold-down to 35 N·m and the high-pressure line to 32 N·m. Confirm any additional procedures against the vehicle’s EPC or service information.

QWhich diagnostic trouble codes are listed for this injector?

The listed diagnostic trouble codes are P0300, P0087, P0201, P0088, and P0204. Use these codes as diagnostic references and confirm the actual fault against the vehicle’s EPC or service information.

QDoes this common-rail diesel injector need coding or adaptation after installation?

The supplied facts do not state coding or adaptation requirements for part 28231014. Confirm coding/adaptation requirements against the vehicle’s EPC or service information instead of guessing.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0201High

Injector Circuit Malfunction - Cylinder 1

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

P0203High

Cylinder 3 Injector Circuit Malfunction / Open Circuit

P0204High

Cylinder 4 Injector Circuit Malfunction / Open Circuit

P0300High

Random or Multiple Cylinder Misfire Detected

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol