Catalog / DELPHI / 28232241
DELPHI

Delphi 28232241

View Specs
SolenoidDelphi Common Rail SystemEuro 4

common rail injector

Reference data for DELPHI 28232241 common rail injector · OEM 28232241, 55221020 · Application 1.3 MultiJet, 1.3 CDTI
OE REFERENCE28232241, 55221020
CONTROL VALVE28239294
NOZZLEG374
EMISSIONEuro 4
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The Delphi 28232241 is an authentic common rail diesel injector calibrated for Chevrolet Sail Diesel and 1.3 MultiJet engine applications. Operating at an engineered rail pressure of 1600 bar, this solenoid assembly features the precision 28239294 control valve and G374 nozzle. Mandatory ECU calibration requires programming the cylinder-specific C3i 20-digit code into the engine control unit to establish smooth delivery balance and Euro 4 emissions compliance. Typical failure symptoms include control valve erosion causing excessive back-leakage, rail pressure deficit (DTC P0087), and erratic cold-start idling. Overhauling necessitates clean room assembly and genuine replacement seals.

Before You Order

Verify Delphi C2i/C3i calibration code and OEM cross reference before installation.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

OEM Ref
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Chevrolet Sail Diesel1.3 SDE (MultiJet)2013-2018
Fiat Punto III1.3 D MultiJet2012-2018
04

Technical Specifications

SpecificationValue
SKU28232241
BrandDELPHI
Fuel SystemCommon Rail (Delphi DFI)
Operating PressureCore Spec
Control ValveCore Spec
🔗 Shared Valve (40 assemblies):282310142823224228232248EMBR00201D
Nozzle CodeCore Spec
🔗 Shared Nozzle (7 assemblies):282310142823224828236383EMBR00001D
Hold Down Torque28 N·m
High-Pressure Line Torque25 N·m
Coding RequiredYes
Emission StandardEuro 4
05

Installation Tips

  1. Depressurize And Clean: Depressurize the fuel system and isolate it according to the workshop procedure, then clean the surrounding area of the injector bore and the cylinder head before opening any connection.
  2. Disconnect Connections: Disconnect the electrical connector and the spill/return connection from the injector, then plug or cover all exposed ports and fittings to prevent dirt ingress.
  3. Remove High-Pressure Line: Remove the high-pressure line from the injector inlet, cap or plug the line and the injector port immediately, and keep the line ends clean.
  4. Extract Old Unit: Release and remove the hold-down device, extract the old injector from the bore, and remove any old seals without damaging the cylinder head or injector bore.
  5. Clean Bore And Seat: Clean the injector bore and seat in the cylinder head, remove carbon and debris, inspect the sealing surfaces, and keep the area covered until the new injector is ready.
  6. Fit Seals And Seat Unit: Fit new seals to the injector, seat the unit in the injector bore, tighten the hold-down to 28 N·m, then reconnect the high-pressure line and tighten it to 25 N·m; reconnect the electrical connector and spill connection.
  7. Calibration Coding: Record the 20-digit Delphi C2i/C3i calibration code and program it with a suitable diagnostic tool.
  8. Leak-Check And Start-Up: Leak-check the high-pressure line and injector connections, start the engine, and inspect for fuel leaks and abnormal running; stop the engine if any leak is found.
Tips & Warnings:
  • Confirm fitment for Chevrolet Sail Diesel 1.3 SDE (MultiJet) 2013-2018 or Fiat Punto III 1.3 D MultiJet 2012-2018 before ordering.
  • Tighten the injector hold-down to 28 N·m and the high-pressure line to 25 N·m.
  • Check the old part against 28232241 and cross references 28232251 and 55221020 before replacement.
06

Frequently Asked Questions

QWhich vehicles does part number 28232241 fit?

It is a common-rail diesel injector for the 1.3 MultiJet and 1.3 CDTI engine family. Listed fitment is Chevrolet Sail Diesel 1.3 SDE (MultiJet) 2013-2018 and Fiat Punto III 1.3 D MultiJet 2012-2018. Confirm against the vehicle's EPC before ordering.

QWhat diagnostic trouble codes are associated with this injector listing?

The verified diagnostic trouble codes listed are P0300, P0087, P0201, P0204, and P0202. The verified facts do not state additional symptoms, so confirm diagnosis against the vehicle's EPC instead of guessing.

QWhat are the mounting and high-pressure line torque specifications?

The mounting / hold-down torque is 28 N·m, and the high-pressure line torque is 25 N·m. This common-rail diesel injector listing states a system pressure of 1600 bar.

QHow can I verify the old injector and check coding or adaptation requirements?

Compare the old part with 28232241 and the listed cross references 28232251 and 55221020. Coding or adaptation requirements are not stated in the verified facts, so confirm them against the vehicle's EPC before installation.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0201High

Injector Circuit Malfunction - Cylinder 1

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

P0203High

Cylinder 3 Injector Circuit Malfunction / Open Circuit

P0204High

Cylinder 4 Injector Circuit Malfunction / Open Circuit

P0300High

Random or Multiple Cylinder Misfire Detected

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol