Catalog / DELPHI / 28342998
DELPHI

Delphi 28342998

View Specs
SolenoidDelphi Common Rail SystemEuro 5

common rail injector

Reference data for DELPHI 28342998 common rail injector · OEM A6510703287, A6510700587, 6510703287 · Application OM651, OM651.916, OM651.930
OE REFERENCEA6510703287, A6510700587, 6510703287
CONTROL VALVE28278897
NOZZLEG379
EMISSIONEuro 5
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The Delphi 28342998 is an authentic common rail diesel injector calibrated for Mercedes-Benz CLS (C218) and OM651 engine applications. Operating at an engineered rail pressure of 1800 bar, this solenoid assembly features the precision 28278897 control valve and G379 nozzle. Mandatory ECU calibration requires programming the cylinder-specific C3i 20-digit code into the engine control unit to establish smooth delivery balance and Euro 5 emissions compliance. Typical failure symptoms include control valve erosion causing excessive back-leakage, rail pressure deficit (DTC P0087), and erratic cold-start idling. Overhauling necessitates clean room assembly and genuine replacement seals.

Before You Order

Verify Delphi C2i/C3i calibration code and OEM cross reference before installation.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

OEM Ref
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Mercedes-Benz CLS (C218)CLS 250 CDI (OM651.924)2011-2017
Mercedes-Benz ML-Class (W166)ML 250 BlueTEC (OM651.960)2011-2015
04

Technical Specifications

SpecificationValue
SKU28342998
BrandDELPHI
Fuel SystemCommon Rail (Delphi DFI)
Operating PressureCore Spec
Control ValveCore Spec
🔗 Shared Valve (10 assemblies):28236381283429972834837028348371
Nozzle CodeCore Spec
🔗 Shared Nozzle (11 assemblies):28236381282363822834837028348371
Hold Down Torque15 N·m + 90°
High-Pressure Line Torque15 N·m + 90°
Coding RequiredYes
Emission StandardEuro 5
05

Installation Tips

  1. Depressurize And Clean: Depressurize the fuel system and isolate it according to the workshop procedure, then clean the surrounding area of the injector bore and the cylinder head before opening any connection.
  2. Disconnect Connections: Disconnect the electrical connector and the spill/return connection from the injector, then plug or cover all exposed ports and fittings to prevent dirt ingress.
  3. Remove High-Pressure Line: Remove the high-pressure line from the injector inlet, cap or plug the line and the injector port immediately, and keep the line ends clean.
  4. Extract Old Unit: Release and remove the hold-down device, extract the old injector from the bore, and remove any old seals without damaging the cylinder head or injector bore.
  5. Clean Bore And Seat: Clean the injector bore and seat in the cylinder head, remove carbon and debris, inspect the sealing surfaces, and keep the area covered until the new injector is ready.
  6. Fit Seals And Seat Unit: Fit new seals to the injector, seat the unit in the injector bore, tighten the hold-down to 15 N·m, then rotate a further 90°, then reconnect the high-pressure line and tighten it to 15 N·m, then rotate a further 90°; reconnect the electrical connector and spill connection.
  7. Calibration Coding: Record the 20-digit Delphi C2i/C3i calibration code and program it with a suitable diagnostic tool.
  8. Leak-Check And Start-Up: Leak-check the high-pressure line and injector connections, start the engine, and inspect for fuel leaks and abnormal running; stop the engine if any leak is found.
Tips & Warnings:
  • Verify the vehicle's exact application and engine variant against the EPC before fitting this injector.
  • Keep the replacement injector sealed until the fuel system is clean and ready for installation.
  • Confirm coding, adaptation, and seal requirements in the workshop manual before starting the job.
06

Frequently Asked Questions

QWill this injector fit my Mercedes-Benz CLS or ML-Class?

This listing covers Mercedes-Benz CLS and ML-Class diesel applications. Confirm your exact model and engine variant against the vehicle's EPC before ordering, and verify the part number is 28342998.

QWhat symptoms mean the injector has failed?

Specific failure symptoms are not stated for this listing; diagnose the vehicle using the manufacturer's workshop data. If replacement is needed, confirm 28342998 against the EPC for your application.

QWhat should I check before ordering this injector?

Check the vehicle's exact model, engine variant, and original injector application against the EPC. Confirm the listing part number is 28342998 and that the diesel common-rail system matches your vehicle.

QDoes the old unit need to be matched or adapted?

Coding and adaptation requirements are not stated for this listing. Confirm them in the vehicle's workshop manual, and verify fitment plus part number 28342998 before installation.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0201High

Injector Circuit Malfunction - Cylinder 1

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

P0203High

Cylinder 3 Injector Circuit Malfunction / Open Circuit

P0204High

Cylinder 4 Injector Circuit Malfunction / Open Circuit

P0300High

Random or Multiple Cylinder Misfire Detected

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol