Delphi 28236382
common rail injector
1112100-ED01A28239294G3791800 bar peak rail pressureProduct Overview
The Delphi 28236382 is an authentic common rail diesel injector calibrated for Great Wall Wingle 6 and GW4D20 engine applications. Operating at an engineered rail pressure of 1800 bar, this solenoid assembly features the precision 28239294 control valve and G379 nozzle. Mandatory ECU calibration requires programming the cylinder-specific C3i 20-digit code into the engine control unit to establish smooth delivery balance and Euro 5 emissions compliance. Typical failure symptoms include control valve erosion causing excessive back-leakage, rail pressure deficit (DTC P0087), and erratic cold-start idling. Overhauling necessitates clean room assembly and genuine replacement seals.
Verify Delphi C2i/C3i calibration code and OEM cross reference before installation.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Great Wall Wingle 6 | 2.0 VGT (GW4D20) | 2014-2020 |
| Haval H6 II | 2.0 Diesel (GW4D20B) | 2017-2021 |
Technical Specifications
| Specification | Value |
|---|---|
| SKU | 28236382 |
| Brand | DELPHI |
| Fuel System | Common Rail (Delphi DFI) |
| Operating PressureCore Spec | |
| Control ValveCore Spec | |
| Nozzle CodeCore Spec | |
| Hold Down Torque | 35 N·m |
| High-Pressure Line Torque | 32 N·m |
| Coding Required | Yes |
| Emission Standard | Euro 5 |
Installation Tips
- Depressurize And Clean: Depressurize the fuel system and isolate it according to the workshop procedure, then clean the surrounding area of the injector bore and the cylinder head before opening any connection.
- Disconnect Connections: Disconnect the electrical connector and the spill/return connection from the injector, then plug or cover all exposed ports and fittings to prevent dirt ingress.
- Remove High-Pressure Line: Remove the high-pressure line from the injector inlet, cap or plug the line and the injector port immediately, and keep the line ends clean.
- Extract Old Unit: Release and remove the hold-down device, extract the old injector from the bore, and remove any old seals without damaging the cylinder head or injector bore.
- Clean Bore And Seat: Clean the injector bore and seat in the cylinder head, remove carbon and debris, inspect the sealing surfaces, and keep the area covered until the new injector is ready.
- Fit Seals And Seat Unit: Fit new seals to the injector, seat the unit in the injector bore, tighten the hold-down to 35 N·m, then reconnect the high-pressure line and tighten it to 32 N·m; reconnect the electrical connector and spill connection.
- Calibration Coding: Record the 20-digit Delphi C2i/C3i calibration code and program it with a suitable diagnostic tool.
- Leak-Check And Start-Up: Leak-check the high-pressure line and injector connections, start the engine, and inspect for fuel leaks and abnormal running; stop the engine if any leak is found.
- Confirm the vehicle's engine family and part number against the EPC before ordering.
- Use 35 N·m for the mounting/hold-down torque and 32 N·m for the high-pressure line torque.
- Check the old injector's part number against 28236382, 28231014, and 1112100-ED01A before replacement.
Frequently Asked Questions
Will this injector fit my Great Wall Wingle 6 or Haval H6?
It is listed for the Great Wall Wingle 6 2.0 VGT (GW4D20) (2014-2020) and Haval H6 II 2.0 Diesel (GW4D20B) (2017-2021). It is a common-rail diesel injector with part number 28236382 and is associated with engine families GW4D20 and GW4D20B. Confirm any other application against the vehicle's EPC.
What torque values should I use when installing this injector?
Use 35 N·m for the mounting/hold-down torque and 32 N·m for the high-pressure line torque. These are the only torque values provided for this part; confirm anything not listed against the vehicle's EPC.
What diagnostic trouble codes are associated with this injector, and how do I verify the old part?
The listed diagnostic trouble codes are P0300, P0087, P0201, P0204, P0202. To verify the old part, compare its part number against 28236382 and the cross references 28231014 and 1112100-ED01A. If the number is not listed, confirm fitment against the vehicle's EPC.
Does this injector require coding/adaptation, and can I reuse the seals?
Coding/adaptation requirements and seal reuse are not stated in the verified facts, so they must be confirmed against the vehicle's EPC rather than guessed. The listed system pressure is 1800 bar. Confirm any procedure not listed before installation.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.