Catalog / DELPHI / 28236381
DELPHI

Delphi 28236381

View Specs
SolenoidDelphi Common Rail SystemEuro 5

common rail injector

Reference data for DELPHI 28236381 common rail injector · OEM 1980R9, 9686191080 · Application DW10CTED4, RH02
OE REFERENCE1980R9, 9686191080
CONTROL VALVE28278897
NOZZLEG379
EMISSIONEuro 5
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The Delphi 28236381 is an authentic common rail diesel injector calibrated for Citroen C4 Picasso I and DW10CTED4 engine applications. Operating at an engineered rail pressure of 1800 bar, this solenoid assembly features the precision 28278897 control valve and G379 nozzle. Mandatory ECU calibration requires programming the cylinder-specific C3i 20-digit code into the engine control unit to establish smooth delivery balance and Euro 5 emissions compliance. Typical failure symptoms include control valve erosion causing excessive back-leakage, rail pressure deficit (DTC P0087), and erratic cold-start idling. Overhauling necessitates clean room assembly and genuine replacement seals.

Before You Order

Verify Delphi C2i/C3i calibration code and OEM cross reference before installation.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

OEM Ref
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Citroen C4 Picasso I2.0 HDi (RHE)2010-2013
Peugeot 5008 I2.0 HDi (RHE)2009-2017
04

Technical Specifications

SpecificationValue
SKU28236381
BrandDELPHI
Fuel SystemCommon Rail (Delphi DFI)
Operating PressureCore Spec
Control ValveCore Spec
🔗 Shared Valve (10 assemblies):2834299728342998EMBR00101DEMBR00301D
Nozzle CodeCore Spec
🔗 Shared Nozzle (11 assemblies):282322422823638228342998EMBR00301D
Hold Down Torque30 N·m + 65°
High-Pressure Line Torque30 N·m + 65°
Coding RequiredYes
Emission StandardEuro 5
05

Installation Tips

  1. Depressurize And Clean: Depressurize the fuel system and isolate it according to the workshop procedure, then clean the surrounding area of the injector bore and the cylinder head before opening any connection.
  2. Disconnect Connections: Disconnect the electrical connector and the spill/return connection from the injector, then plug or cover all exposed ports and fittings to prevent dirt ingress.
  3. Remove High-Pressure Line: Remove the high-pressure line from the injector inlet, cap or plug the line and the injector port immediately, and keep the line ends clean.
  4. Extract Old Unit: Release and remove the hold-down device, extract the old injector from the bore, and remove any old seals without damaging the cylinder head or injector bore.
  5. Clean Bore And Seat: Clean the injector bore and seat in the cylinder head, remove carbon and debris, inspect the sealing surfaces, and keep the area covered until the new injector is ready.
  6. Fit Seals And Seat Unit: Fit new seals to the injector, seat the unit in the injector bore, tighten the hold-down to 30 N·m, then rotate a further 65°, then reconnect the high-pressure line and tighten it to 30 N·m, then rotate a further 65°; reconnect the electrical connector and spill connection.
  7. Calibration Coding: Record the 20-digit Delphi C2i/C3i calibration code and program it with a suitable diagnostic tool.
  8. Leak-Check And Start-Up: Leak-check the high-pressure line and injector connections, start the engine, and inspect for fuel leaks and abnormal running; stop the engine if any leak is found.
Tips & Warnings:
  • Confirm exact fitment against the vehicle's EPC before ordering or fitting 28236381.
  • Check the workshop manual for coding, adaptation, and installation requirements before replacing the injector.
  • Do not assume seal reuse or service life; confirm these details in the vehicle's workshop manual.
06

Frequently Asked Questions

QFor which vehicles is this injector listed?

This 28236381 common-rail diesel injector is listed for the Citroen and Peugeot applications shown in the product fitment. Confirm exact engine and model fitment against the vehicle's EPC or workshop manual before ordering.

QWhat symptoms indicate a failed injector?

The listing does not specify failure symptoms; confirm diagnosis with the vehicle's workshop manual and proper tests before ordering a replacement injector.

QWhat should I check before ordering this injector?

Confirm exact engine and model fitment against the vehicle's EPC, then check the workshop manual for any coding, adaptation, or installation requirements before ordering this injector.

QDoes the new injector need coding or adaptation?

Coding and adaptation requirements are not stated for this 28236381 injector. Confirm the required procedure against the vehicle's EPC or workshop manual before installation.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0201High

Injector Circuit Malfunction - Cylinder 1

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

P0203High

Cylinder 3 Injector Circuit Malfunction / Open Circuit

P0204High

Cylinder 4 Injector Circuit Malfunction / Open Circuit

P0300High

Random or Multiple Cylinder Misfire Detected

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol