Delphi 28348371
common rail injector
A6510704987, A6510700587, 651070498728278897G3791800 bar peak rail pressureProduct Overview
The Delphi 28348371 is an authentic common rail diesel injector calibrated for Mercedes-Benz C-Class (W204) and OM651 engine applications. Operating at an engineered rail pressure of 1800 bar, this solenoid assembly features the precision 28278897 control valve and G379 nozzle. Mandatory ECU calibration requires programming the cylinder-specific C3i 20-digit code into the engine control unit to establish smooth delivery balance and Euro 5 emissions compliance. Typical failure symptoms include control valve erosion causing excessive back-leakage, rail pressure deficit (DTC P0087), and erratic cold-start idling. Overhauling necessitates clean room assembly and genuine replacement seals.
Verify Delphi C2i/C3i calibration code and OEM cross reference before installation.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Mercedes-Benz C-Class (W204) | C 200 CDI (OM651.913) | 2010-2014 |
| Mercedes-Benz E-Class (W212) | E 220 CDI (OM651.924) | 2009-2016 |
| Mercedes-Benz Sprinter (W906) | 213/313 CDI (OM651.955) | 2009-2016 |
Technical Specifications
| Specification | Value |
|---|---|
| SKU | 28348371 |
| Brand | DELPHI |
| Fuel System | Common Rail (Delphi DFI) |
| Operating PressureCore Spec | |
| Control ValveCore Spec | |
| Nozzle CodeCore Spec | |
| Hold Down Torque | 15 N·m + 90° |
| High-Pressure Line Torque | 15 N·m + 90° |
| Coding Required | Yes |
| Emission Standard | Euro 5 |
Installation Tips
- Depressurize And Clean: Depressurize the fuel system and isolate it according to the workshop procedure, then clean the surrounding area of the injector bore and the cylinder head before opening any connection.
- Disconnect Connections: Disconnect the electrical connector and the spill/return connection from the injector, then plug or cover all exposed ports and fittings to prevent dirt ingress.
- Remove High-Pressure Line: Remove the high-pressure line from the injector inlet, cap or plug the line and the injector port immediately, and keep the line ends clean.
- Extract Old Unit: Release and remove the hold-down device, extract the old injector from the bore, and remove any old seals without damaging the cylinder head or injector bore.
- Clean Bore And Seat: Clean the injector bore and seat in the cylinder head, remove carbon and debris, inspect the sealing surfaces, and keep the area covered until the new injector is ready.
- Fit Seals And Seat Unit: Fit new seals to the injector, seat the unit in the injector bore, tighten the hold-down to 15 N·m, then rotate a further 90°, then reconnect the high-pressure line and tighten it to 15 N·m, then rotate a further 90°; reconnect the electrical connector and spill connection.
- Calibration Coding: Record the 20-digit Delphi C2i/C3i calibration code and program it with a suitable diagnostic tool.
- Leak-Check And Start-Up: Leak-check the high-pressure line and injector connections, start the engine, and inspect for fuel leaks and abnormal running; stop the engine if any leak is found.
- Verify part number 28348371 and the listed cross references before installation.
- Tighten the mounting / hold-down to 15 N·m + 90°.
- Tighten the high-pressure line to 15 N·m + 90°.
Frequently Asked Questions
Will part number 28348371 fit my vehicle, and what cross references identify it?
The listed part number is 28348371, a common-rail diesel injector, with cross references 28342997, EMBR00002D, A6510704987, A6510700587, and 6510704987. Listed fitment is Mercedes-Benz C-Class (W204) C 200 CDI (OM651.913) 2010-2014, E-Class (W212) E 220 CDI (OM651.924) 2009-2016, and Sprinter (W906) 213/313 CDI (OM651.955) 2009-2016. Confirm fitment against the vehicle's EPC before ordering.
Which diagnostic trouble codes can point to this injector?
The listed diagnostic trouble codes are P0300, P0087, P0201, P0088, and P0204. The verified facts do not state symptoms beyond these codes, so confirm the diagnosis against the vehicle's EPC.
What are the mounting and high-pressure line torque settings?
The mounting / hold-down torque is 15 N·m + 90°. The high-pressure line torque is 15 N·m + 90°. This injector is listed for a system pressure of 1800 bar.
Does this injector require coding or adaptation, and can the seals be reused?
The verified facts do not state coding or adaptation requirements for this common-rail diesel injector. They also do not state whether the seals can be reused. Confirm both points against the vehicle's EPC instead of guessing.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.