Catalog / DELPHI / EJBR01401Z
DELPHI

Delphi EJBR01401Z

View Specs
SolenoidDelphi Common Rail SystemEuro 3

common rail injector

Reference data for DELPHI EJBR01401Z common rail injector · OEM 7711135327, 8200140147, 8200206565, 16600-00QAA · Application K9K, K9K 700, K9K 704
OE REFERENCE7711135327, 8200140147, 8200206565, 16600-00QAA
CONTROL VALVE28239294
NOZZLEL087PBD
EMISSIONEuro 3
WARRANTY12 Months
01

Product Overview

WORKSHOP NOTICEECU Calibration / IMA Coding Required

This injector requires 6-8 digit calibration code programming (IMA / QR code) into the vehicle ECU (using Bosch KTS, Lexia/Diagbox or equivalent diagnostic equipment) following replacement to balance cylinder fuel delivery and prevent DTC P0300 misfire codes.

The Delphi EJBR01401Z is an authentic common rail diesel injector calibrated for Renault Clio II and K9K engine applications. Operating at an engineered rail pressure of 1400 bar, this solenoid assembly features the precision 28239294 control valve and L087PBD nozzle. Mandatory ECU calibration requires programming the cylinder-specific C2i 16-digit hexadecimal code into the engine control unit to establish smooth delivery balance and Euro 3 emissions compliance. Typical failure symptoms include control valve erosion causing excessive back-leakage, rail pressure deficit (DTC P0087), and erratic cold-start idling. Overhauling necessitates clean room assembly and genuine replacement seals.

Before You Order

Verify Delphi C2i/C3i calibration code and OEM cross reference before installation.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

OEM Ref
OE Nozzle
03

Vehicle & Engine Fitment

VehicleEngineYears
Renault Clio II1.5 dCi (K9K 700)2001-2005
Renault Kangoo I1.5 dCi (K9K 704)2001-2007
Nissan Micra III (K12)1.5 dCi (K9K 704)2003-2006
04

Technical Specifications

SpecificationValue
SKUEJBR01401Z
BrandDELPHI
Fuel SystemCommon Rail (Delphi DFI)
Operating PressureCore Spec
Control ValveCore Spec
🔗 Shared Valve (40 assemblies):EJBR01101ZEJBR01201ZEJBR01601ZEJBR01701Z
Nozzle CodeCore Spec
🔗 Shared Nozzle (2 assemblies):EJBR02201Z
Hold Down Torque30 N·m
High-Pressure Line Torque28 N·m
Coding RequiredYes
Emission StandardEuro 3
05

Installation Tips

  1. Depressurize And Clean: Depressurize the fuel system and isolate it according to the workshop procedure, then clean the surrounding area of the injector bore and the cylinder head before opening any connection.
  2. Disconnect Connections: Disconnect the electrical connector and the spill/return connection from the injector, then plug or cover all exposed ports and fittings to prevent dirt ingress.
  3. Remove High-Pressure Line: Remove the high-pressure line from the injector inlet, cap or plug the line and the injector port immediately, and keep the line ends clean.
  4. Extract Old Unit: Release and remove the hold-down device, extract the old injector from the bore, and remove any old seals without damaging the cylinder head or injector bore.
  5. Clean Bore And Seat: Clean the injector bore and seat in the cylinder head, remove carbon and debris, inspect the sealing surfaces, and keep the area covered until the new injector is ready.
  6. Fit Seals And Seat Unit: Fit new seals to the injector, seat the unit in the injector bore, tighten the hold-down to 30 N·m, then reconnect the high-pressure line and tighten it to 28 N·m; reconnect the electrical connector and spill connection.
  7. Calibration Coding: Record the 20-digit Delphi C2i/C3i calibration code and program it with a suitable diagnostic tool.
  8. Leak-Check And Start-Up: Leak-check the high-pressure line and injector connections, start the engine, and inspect for fuel leaks and abnormal running; stop the engine if any leak is found.
Tips & Warnings:
  • Confirm the old injector part number against EJBR01401Z and the listed cross references before replacement.
  • Tighten the mounting/hold-down to 30 N·m.
  • Tighten the high-pressure line to 28 N·m.
06

Frequently Asked Questions

QHow do I confirm this injector fits my vehicle and matches the old part?

Listed fitment is Renault Clio II 1.5 dCi (K9K 700) (2001-2005), Renault Kangoo I 1.5 dCi (K9K 704) (2001-2007), and Nissan Micra III (K12) 1.5 dCi (K9K 704) (2003-2006). Compare the old unit against EJBR01401Z and the listed cross references: EJBR01701Z, EJBR02101Z, 7711135327, 8200140147, 8200206565, and 16600-00QAA. Confirm exact fitment against the vehicle's EPC before ordering.

QWhat diagnostic trouble codes are listed for this common-rail diesel injector?

The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0201. Use these codes only as the listed reference points and confirm the diagnosis against the vehicle's EPC.

QWhat are the mounting and high-pressure line torques for EJBR01401Z?

The mounting/hold-down torque is 30 N·m, and the high-pressure line torque is 28 N·m. The listed system pressure for this common-rail diesel injector is 1400 bar.

QDoes this injector require coding/adaptation, and can the old seals be reused?

The verified facts do not state coding/adaptation requirements or seal-reuse guidance, so confirm both against the vehicle's EPC instead of guessing. EJBR01401Z is a common-rail diesel injector for the K9K, K9K 700, and K9K 704 engine families.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0201High

Injector Circuit Malfunction - Cylinder 1

P0202High

Cylinder 2 Injector Circuit Malfunction / Open Circuit

P0203High

Cylinder 3 Injector Circuit Malfunction / Open Circuit

P0204High

Cylinder 4 Injector Circuit Malfunction / Open Circuit

P0300High

Random or Multiple Cylinder Misfire Detected

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

Workshop Diagnostic Protocol

Common Rail Injector Back-Leak Testing Guide

Common rail injector backleak test protocol. Graduated cylinder setup, warm idle & cranking limits in mL/min, control valve wear & P0087 diagnosis.

Read Technical Protocol
ECU Calibration Protocol

Bosch IMA Injector Coding & Location Guide

Bosch common rail injector IMA coding guide. Locate laser-etched 6-9 digit codes on body, ECU OBD2 adaptation steps & test bench calibration facts.

Read Technical Protocol
COMMON RAIL DIESEL WORKSHOP SOP

Stuck Injector Removal & Carbon Cleaning SOP | FuelPartsDB

Comprehensive workshop SOP for stuck diesel injector removal, pneumatic vibro-puller extraction, carbon solvent softening, and seat reaming without damage.

Read Technical Protocol
ASSEMBLY & INSTALLATION PROTOCOL

Diesel Injector Torque Specs & TTY Angles Guide

Common rail diesel injector hold-down bolt torque specs, TTY angles & pipe unions. Covers Bosch, Detroit DD13, Cummins & VAG 2.0 TDI workshop data in Nm.

Read Technical Protocol