Catalog / BOSCH / HL3Z-9350-A
BOSCH

BOSCH HL3Z-9350-A

View Specs
SolenoidGDI High-Pressure Fuel Pump (HPFP)Euro 6

High Pressure Fuel Pump Ford F 150 Expedition Lincoln Navigator 3.5L EcoBoost HL3E 9D376 AA GDP1007

Reference data for BOSCH HL3Z-9350-A high-pressure fuel pump · OEM HL3E-9D376-AA, GDP1007, HM10034, HPP0025, 217-3450 · Application Ford 3.5L V6 EcoBoost Twin-Turbo (Gen 1 & Gen 2 D35)
OE REFERENCEHL3E-9D376-AA, GDP1007, HM10034, HPP0025, 217-3450
CONTROL VALVE-
NOZZLE-
EMISSIONEuro 6
WARRANTY12 Months
01

Product Overview

The BOSCH HL3Z-9350-A is a precision automotive OE replacement component engineered specifically for Ford 3.5L V6 EcoBoost Twin-Turbo DOHC (Gen 2) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.

Before You Order

Confirm HL3Z-9350-A Continental VDO high-pressure fuel pump, 200 bar system pressure, and drive coupling match your engine before ordering; no ECU calibration coding is required after fitting.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

Primary
OEM Ref
03

Vehicle & Engine Fitment

VehicleEngineYears
Ford F-150 3.5 EcoBoostD352011-2020
Ford Expedition 3.5 EcoBoostD352015-2021
Lincoln Navigator 3.5 EcoBoostD352015-2021
04

Technical Specifications

SpecificationValue
part_numberHL3Z-9350-A
oem_referenceHL3Z-9350-A
manufacturerBOSCH
system_typeHigh Pressure Fuel Pump
pressure_rating200 bar (2900 psi)
operating_temperature-40°C to +135°C
flange_mount_torque10 N-m (89 lb-in)
high_pressure_line_torque30 N-m (22 lb-ft)
diagnostic_dtcP0087, P0088, P0171, P0174

Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)

Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.

BOSCHExact Engine & Chassis Match
BL3Z-9F593-B
Gasoline Direct Injection (GDI) • 150 bar
🚙 Ford Expedition 3.5 Ecoboost (D35)
Technical Specifications & Pinout
BOSCHExact Engine & Chassis Match
HL3Z-9F593-B
Gasoline Direct Injection (GDI) • 200 bar
🚙 Ford Expedition 3.5 Ecoboost (D35)
Technical Specifications & Pinout
BOSCHExact Engine & Chassis Match
DL3Z-9F593-A
Gasoline Direct Injection (GDI) • 150 bar
🚙 Engine Code D35
Technical Specifications & Pinout
05

Installation Tips

  1. Depressurize the fuel system before opening any fuel lines.
  2. Clean the pump mounting area and fuel connections to prevent debris ingress.
  3. Check the timing belt/chain or camshaft drive and the pump drive coupling.
  4. Remove the old pump and fit new seals.
  5. Install the high-pressure fuel pump with the drive coupling aligned.
  6. Connect the fuel lines and prime the fuel circuit.
  7. Check all connections for leaks and confirm rail pressure.
  8. Run the engine and recheck for leaks before road test.
Tips & Warnings:
  • Use new seals, keep the fuel circuit clean, prime the system before starting, and verify the pump is driven correctly by the timing belt/chain or camshaft.
  • Check for leaks after fitting.
06

Frequently Asked Questions

QWill HL3Z-9350-A fit my Ford EcoBoost vehicle?

HL3Z-9350-A is listed for the Ford EcoBoost fitment shown, plus Expedition and Lincoln Navigator EcoBoost applications. Confirm your exact model and engine against the vehicle’s EPC or workshop manual before ordering.

QWhat symptoms indicate the high-pressure fuel pump has failed?

Symptoms of a failed high-pressure fuel pump are not stated in this listing. Have the vehicle diagnosed against the workshop manual before replacing HL3Z-9350-A.

QWhat should I check before ordering this pump?

Before ordering HL3Z-9350-A, verify the vehicle’s exact model and engine against the EPC or workshop manual, and confirm the original pump’s part number matches the application.

QDoes the new pump need coding or matching?

Coding or adaptation requirements for HL3Z-9350-A are not stated here. Confirm whether the pump must be matched or adapted using the vehicle’s EPC or workshop manual before installation.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0088Critical

Fuel Rail/System Pressure Too High

P0089Critical

Fuel Pressure Regulator 1 Performance

P0191Critical

Fuel Rail Pressure Sensor 'A' Circuit Range/Performance

P0002High

Fuel Volume Regulator Control Circuit Range / Performance (VCV / IMV)

P0090High

Fuel Pressure Regulator 1 Control Circuit

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

COMMON RAIL WORKSHOP DIAGNOSTICS

Common Rail High-Pressure Pump Diagnostics Guide

Diagnose common rail high-pressure pump failure: suction vacuum, CP4 roller glitter, plunger wear, air ingress & P0087 hard start. Workshop bench testing.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Fuel Metering Valve (IMV/SCV) Diagnostics Guide

Diagnostic guide for common rail fuel metering valves (IMV/SCV/FCA/MPROP). Normally open vs closed, coil resistance, PWM duty cycle & P0088 / P0089 test.

Read Technical Protocol
OBD-II DIAGNOSTIC PROTOCOL

P0087 Low Rail Pressure Diagnosis Guide

Step-by-step workshop diagnostic protocol for OBD-II DTC P0087 (Fuel Rail Pressure Too Low). 5-stage troubleshooting tree: backleak testing, SCV valve, PRV valve, and high-pressure pump.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Rail Pressure Relief Valve Diagnostics Guide

Common rail pressure relief valve (PRV) testing guide. Diagnose hot start stalls, P0087 rail pressure loss, return line leakage & single vs 2-stage valves.

Read Technical Protocol