HITACHI 12673449
High Pressure Fuel Pump Buick Envision Regal Chevy Malibu Equinox 1.5T SIDI LFV HPP0021
12662571, 12658828, 12678685, HPP0021, GDP105, HM10041--200 bar peak rail pressureProduct Overview
The 12673449 is an original equipment (HITACHI) precision component engineered specifically for the GM 1.5L Turbo SIDI Ecotec DOHC 16V (LFV / LYX). Operating at peak injection pressures up to 200 bar (2900 psi), this unit delivers micro-metered fuel atomization required for high thermal efficiency, responsive low-end torque, and compliant tailpipe emissions. Common symptoms indicating component failure include rough idle shivering, extended cold-cranking intervals (5-10 seconds), unburned fuel odor in the engine oil, and active engine malfunction codes such as P0087, P0088, P0171, P053F.
Always verify the OE reference 12662571, 12658828, 12678685, HPP0021 stamped on your existing pump body before ordering; confirm the pump part number and drive coupling match your engine before unsealing the packaging. 12673449 needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number / SKU | 12673449 |
| Manufacturer Brand | HITACHI |
| Component Type | Mechanical High Pressure Fuel Pump (HPFP) |
| Engine Application | GM 1.5L Turbo SIDI Ecotec DOHC 16V (LFV / LYX) |
| Operating PressureCore Spec | |
| Mounting Torque (Flange / Bracket) | 13 N-m (115 lb-in) |
| Fuel Line / Rail Torque | 30 N-m (22 lb-ft) |
| Primary Diagnostic Fault Codes | P0087, P0088, P0171, P053F |
Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)
Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.
Installation Tips
- Depressurize Fuel System: Pull fuel pump fuse or disconnect LPFP harness. Crank engine 5-8 seconds until it stalls to drop residual rail pressure below 5 bar.
- Clean Surrounding Cavity: Blow compressed air around cylinder head bore or pump flange cavity to prevent dirt ingress into the fuel rail.
- Lubricate & Fit Seals: Inspect Teflon combustion seals or O-rings. Coat lightly with clean motor oil (do not use grease) to avoid tearing during insertion.
- Torque to Factory Specification: Hand-thread bolts evenly. Tighten mounting fasteners to 13 N-m (115 lb-in), and torque fuel line fittings to 30 N-m (22 lb-ft).
- Prime & Leak Check: Cycle ignition to RUN position 3 times (5 seconds each) to build low-side pressure. Inspect fittings for leaks before starting engine.
- Verify the old pump against cross references 12673449, 12662571, 12658828, 12678685, HPP0021, and GDP105 before installation.
- Tighten the mounting / hold-down to 13 N·m and the high-pressure line to 30 N·m.
- Confirm fitment, coding/adaptation, and seal reuse against the vehicle's EPC before fitting.
Frequently Asked Questions
What vehicle applications and system pressure does part 12673449 cover?
Part 12673449 is a gasoline direct-injection high-pressure fuel pump for a 200 bar system. Listed fitment is Chevrolet Malibu XL 1.5 Turbo 1.5L Ecotec LFV 125kW (2016-2023), Chevrolet Equinox 1.5 Turbo 1.5L Ecotec LYX 125kW (2017-2023), and Buick Regal 1.5 Turbo 1.5L Ecotec LFV 125kW (2017-2023). It is listed for the GM 1.5L Ecotec Turbo SIDI (LFV / LYX / L3G) engine family; confirm against the vehicle's EPC before ordering.
What diagnostic trouble codes are associated with this pump, and what symptoms should I expect if it fails?
The verified facts list diagnostic trouble codes P0300, P0087, P0193, P0089, and P0191 for this listing. A symptom list for a failed unit is not stated, so any symptom-to-code diagnosis beyond those listed codes must be confirmed against the vehicle's EPC instead of guessing.
What are the mounting/hold-down and high-pressure line torque specifications?
Mounting / hold-down torque is 13 N·m. High-pressure line torque is 30 N·m. Use these listed values for the specified pump and line joints.
What is the expected service life, and is coding/adaptation or seal reuse required?
Expected service life is not stated in the verified facts. Coding/adaptation and seal reuse are also not stated, so these points must be confirmed against the vehicle's EPC instead of guessing.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.