HITACHI 12694551
High Pressure Fuel Pump Chevrolet Silverado Tahoe Suburban GMC Sierra Yukon Cadillac Escalade 5.3L 6.2L V8 HM10041 GDP105
12659935, 12642287, 12677002, HM10041, GDP105, HPP0021, 217-3445--150 bar peak rail pressureProduct Overview
The HITACHI 12694551 is a precision automotive OE replacement component engineered specifically for General Motors 5.3L L83 & 6.2L L86 EcoTec3 V8 SIDI powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Before ordering, verify that high-pressure pump 12694551 (Continental VDO) matches your existing pump and drive coupling; confirm the listed application and inspect the packaging before unsealing.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 12694551 |
| oem_reference | 12694551 |
| manufacturer | HITACHI |
| system_type | High Pressure Fuel Pump |
| pressure_rating | 150 bar (2175 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 15 N-m (11 lb-ft) |
| high_pressure_line_torque | 30 N-m (22 lb-ft) |
| diagnostic_dtc | P0087, P0089, P0171, P0174 |
Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)
Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.
Installation Tips
- Depressurize the fuel system before disconnecting any lines.
- Clean the pump mounting area and line fittings.
- Inspect the timing belt/chain or camshaft pump drive for wear.
- Fit the high-pressure pump with new seals.
- Reconnect the high-pressure lines and mounting fasteners to manufacturer specifications.
- Prime the fuel circuit and check for leaks.
- Start the engine and verify rail pressure builds.
- Use new seals; never reuse old pump seals.
- Keep the fuel circuit capped and clean during fitting.
- Prime the low-pressure side before cranking.
- Check all high-pressure connections for leaks after start-up.
- Confirm the pump drive is correctly aligned before tightening.
Frequently Asked Questions
Will this pump fit my truck?
It is listed for the specified GM Gen V gasoline direct-injection applications, including Chevrolet Silverado, Tahoe, and Suburban plus GMC Sierra and Yukon. Confirm exact engine code and application against the EPC before ordering.
What symptoms suggest the high-pressure fuel pump is failing?
Typical failure signs can include hard starting, rough running, misfires, loss of power, or a fuel-pressure-related fault. Since pressure specs are not listed here, have the fault confirmed with proper diagnostic data before replacing the pump.
What should I check before ordering?
Before ordering, verify the part number 12694551, confirm the vehicle's engine code and application match the listed fitment, and check for related fuel-system faults. If coding or relearn requirements apply, confirm them in the workshop manual.
Does the replacement pump need coding or adaptation?
This listing does not state whether the pump must be matched or adapted. Confirm any programming, coding, or relearn requirement against the vehicle's EPC or workshop manual before installation.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.