KEIHIN 16450-5LA-A01
Direct Fuel Injector Honda Accord CR V Odyssey 2.4L Earth Dreams K24W K24V FJ1218
16010-5LA-305, FJ1218, 842-12380, 16450-5LA-A02--200 bar peak rail pressureProduct Overview
The KEIHIN 16450-5LA-A01 is a precision automotive OE replacement component engineered specifically for Honda 2.4L 4-Cylinder Earth Dreams DOHC i-VTEC (K24W / K24V) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference 160105LA305, FJ1218, 84212380, 164505LAA02 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 16450-5LA-A01 needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 16450-5LA-A01 |
| oem_reference | 16450-5LA-A01 |
| manufacturer | KEIHIN |
| system_type | Fuel Injector |
| pressure_rating | 200 bar (2900 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 12 N-m (106 lb-in) |
| high_pressure_line_torque | 28 N-m (21 lb-ft) |
| diagnostic_dtc | P0300, P0301, P0171, P0172 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 12 N-m (106 lb-in).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 28 N-m (21 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
Will this gasoline direct-injection injector fit my Honda or Acura?
It is listed for Honda Accord Mk8 / CR-V with K24W1, K24W2, K24Z, or K24A (2008-2014), Acura TSX CU2 (2009-2014), and Honda Civic Si (2012-2015). Confirm the vehicle’s engine code and application against its EPC before ordering.
What diagnostic trouble codes are associated with this injector?
The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0304. Use these as diagnostic references only and confirm the failed injector against the vehicle’s EPC/service information.
What are the torque specs for installing this injector?
The mounting/hold-down torque is 12 N·m and the high-pressure line torque is 28 N·m, with a system pressure of 200 bar. Use only these listed values and confirm any additional procedures against the vehicle’s EPC/service information.
How do I verify the old injector and cross-reference this part?
The part number is 16450-5LA-A01, and listed cross references are 164505LAA01, 160105LA305, FJ1218, 84212380, 164505LAA02, and 160105A2A52. Compare these against the old injector markings and confirm fitment against the vehicle’s EPC.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.