KEIHIN 16790-5A2-A01
High Pressure Fuel Pump Honda Accord CR V Odyssey 2.4L Earth Dreams K24W GE190 019
GE190-019, 296100-0040INTEGRATED ELECTROMAGNETIC FLOW CONTROL SOLENOID-200 bar peak rail pressureProduct Overview
The 16790-5A2-A01 is an OEM industrial-grade fuel component manufactured by KEIHIN for high-performance gasoline direct injection (GDI) platforms. Operating at pressures up to 200 bar, this component delivers precision fuel metering to meet stringent Euro 6 emissions and high-efficiency requirements.
Always verify the OE reference GE190019, 2961000040 stamped on your existing pump body before ordering; confirm the pump part number and drive coupling match your engine before unsealing the packaging. 16790-5A2-A01 needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Keihin Mechanical Single-Piston High Pressure Fuel Pump |
| Operating PressureCore Spec | |
| Drive Mechanism | Exhaust camshaft 4-lobe drive profile operating roller tappet |
| Mounting Flange Bolt Torque | 12 N·m (tighten evenly in progressive alternating passes) |
| High Pressure Pipe Torque | 28 N·m Flare Nut Connection |
| Flow Control Solenoid Resistance | 8.5 - 10.5 Ω at 20°C (PCM PWM duty cycle regulated) |
| Common Fault Codes | P0087 (Fuel Rail Pressure Low), P0088 (Rail Pressure High), P0172 (Fuel System Rich - Oil Dilution) |
| Workshop Precaution | Inspect camshaft roller follower for pitting and replace pump O-ring with clean engine oil lubrication |
Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)
Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.
Installation Tips
- Depressurize Fuel Rail & Remove High Pressure Pump Cover: Depressurize fuel lines via fuel pump relay removal. Remove engine cover and pump sound insulation bracket atop cylinder head.
- Disconnect Low Pressure Feed Line & Steel High Pressure Flare Nut: Disconnect low pressure rubber supply line with quick-release tool. Unscrew high pressure steel line flare nut (28 N·m) with backup counter-wrench.
- Unfasten Mounting Bolts Evenly & Inspect Roller Tappet: Loosen two mounting bolts (12 N·m) alternately in half-turn steps to relieve spring tension. Lift pump and inspect roller tappet and camshaft lobe.
- Fit New O-Ring, Torque Bolts Evenly & Verify Pressure Integrity: Install replacement O-ring with fresh engine oil coating. Torque bolts alternately to 12 N·m. Tighten steel fuel line to 28 N·m. Start engine and verify zero fuel leaks.
- Verify part number 16790-5A2-A01 and the exact engine code against the vehicle's EPC before ordering.
- Tighten the pump mounting/hold-down fasteners to 12 N·m.
- Tighten the high-pressure line to 28 N·m.
Frequently Asked Questions
Will this pump fit my Honda?
Part 16790-5A2-A01 fits the listed Honda applications: Accord IX 2.4L K24W1/K24W2 (2013-2017), CR-V IV 2.4L K24W9 136kW (2015-2016), and Odyssey V 2.4L K24W5 137kW (2015-2019). The listed engine family is Honda 2.4L Earth Dreams & K-Series i-VTEC (K24W1 / K24W2 / K24Z / K24A). Cross references are 167905A2A01, GE190019, 2961000040, 164505LAA01, 16625AA040, and 1679059B004. Confirm exact fitment against the vehicle's EPC.
What fault codes can indicate a problem with this high-pressure fuel pump?
The verified diagnostic trouble codes for this high-pressure fuel pump listing are P0300, P0087, P0193, P0089, and P0191. Use these with vehicle-specific diagnostics; no other symptom or threshold information is stated in the verified facts.
Does this high-pressure fuel pump need coding or adaptation after installation?
No coding or adaptation requirement is stated in the verified facts for part 16790-5A2-A01. Confirm any coding or adaptation requirement against the vehicle's EPC before installation.
Can the mounting seals or high-pressure line be reused?
The verified facts do not state whether the mounting seals or high-pressure line can be reused. Confirm reuse or replacement against the vehicle's EPC before assembly. When installing, the mounting/hold-down torque is 12 N·m and the high-pressure line torque is 28 N·m.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.