KEIHIN 16450-PPA-A01
Multi Point Fuel Injector Honda CR V Accord Civic Si Element 2.4L 2.0L K24A1 K20A3 FJ484
16450-RAA-A01, FJ484, 842-12270--4 bar peak rail pressureProduct Overview
The KEIHIN 16450-PPA-A01 is a precision automotive OE replacement component engineered specifically for Honda 2.4L K24A1 / K24A4 & 2.0L K20A3 DOHC i-VTEC powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference 16450RAAA01, FJ484, 84212270 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 16450-PPA-A01 needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 16450-PPA-A01 |
| oem_reference | 16450-PPA-A01 |
| manufacturer | KEIHIN |
| system_type | Fuel Injector |
| pressure_rating | 3.5 bar (50 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 12 N-m (9 lb-ft) |
| high_pressure_line_torque | 12 N-m (9 lb-ft) |
| diagnostic_dtc | P0171, P0300, P0301, P0172 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 12 N-m (9 lb-ft).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 12 N-m (9 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
Will this multi-point (port) fuel injector fit my Honda or Acura 2.4L?
The listing covers Honda 2.4L Earth Dreams & K-Series i-VTEC engines K24W1, K24W2, K24Z, and K24A. Listed fitment includes Honda Accord Mk8/CR-V (2008-2014), Acura TSX CU2 (2009-2014), and Honda Civic Si (2012-2015). Confirm against the vehicle’s EPC before ordering.
What diagnostic trouble codes are listed, and is coding/adaptation required?
The verified diagnostic trouble codes for this listing are P0300, P0301, P0087, P0302, and P0304. Coding/adaptation requirements are not stated in the verified facts, so confirm against the vehicle’s EPC instead of guessing.
What system pressure and torques apply to this injector listing?
The listed system pressure is 4 bar. The mounting/hold-down torque is 12 N·m, and the high-pressure line torque is 12 N·m.
How can I verify the old injector part number?
The listed part number is 16450-PPA-A01, and cross references include 16450PPAA01, 16450RAAA01, FJ484, 84212270, and 164505LAA01. If the old markings are unclear, confirm against the vehicle’s EPC instead of guessing.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.