KEIHIN 35310-2B130
Direct Fuel Injector Hyundai Veloster Turbo Sonata Kia Forte K3 Optima 1.6T Gamma GDI G4FJ FJ1276
35310-2B110, FJ1276, 842-12401--150 bar peak rail pressureProduct Overview
The KEIHIN 35310-2B130 is a precision automotive OE replacement component engineered specifically for Hyundai Kia 1.6T 4-Cylinder Turbo GDI Gamma (G4FJ) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference 353102B110, FJ1276, 84212401 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 35310-2B130 needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 35310-2B130 |
| oem_reference | 35310-2B130 |
| manufacturer | KEIHIN |
| system_type | Fuel Injector |
| pressure_rating | 150 bar (2175 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 11 N-m (97 lb-in) |
| high_pressure_line_torque | 27 N-m (20 lb-ft) |
| diagnostic_dtc | P0300, P0301, P0171, P0172 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 11 N-m (97 lb-in).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 27 N-m (20 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
Will this injector fit my Hyundai/Kia 1.6L Gamma GDI or 1.6T T-GDI?
It is listed for the Hyundai/Kia 1.6L Gamma GDI & 1.6T T-GDI engine family (G4FD / G4FJ), including Hyundai Sonata 2015-2019, Tucson 2015-2021, Veloster 2013-2020, and Kia Optima/K5 2016-2020. Confirm fitment by part number 35310-2B130 against the vehicle’s EPC before ordering.
What diagnostic trouble codes are listed for this gasoline direct-injection injector?
The listed diagnostic trouble codes are P0300, P0301, P0302, P0304, and P0087. The listing does not state additional symptom descriptions, so confirm the diagnosis against the vehicle’s EPC before replacing parts.
Does this injector require coding/adaptation, and can I reuse the seals?
The provided facts do not state coding/adaptation requirements or seal-reuse guidance for this injector. Confirm both points against the vehicle’s EPC before installation rather than guessing.
How can I verify the old injector part number and what pressure and installation torque values apply?
Compare the old injector markings with part number 35310-2B130 and the listed cross references: 353102B130, 353102B110, FJ1276, 84212401, and 353202B140. The listed system pressure is 150 bar; mounting/hold-down torque is 11 N·m and high-pressure line torque is 27 N·m. Confirm procedure details against the vehicle’s EPC.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.