CONTINENTAL 35310-2G700
Direct Fuel Injector Hyundai Sonata Santa Fe Kia Optima Sorento 2.4L GDI 2.0T Theta II FJ1189
35310-2GGA0, FJ1189, 842-12401--150 bar peak rail pressureProduct Overview
The CONTINENTAL 35310-2G700 is a precision automotive OE replacement component engineered specifically for Hyundai Kia 2.4L GDI & 2.0L Turbo Theta II (G4KJ / G4KH) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference 353102GGA0, FJ1189, 84212401 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 35310-2G700 needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 35310-2G700 |
| oem_reference | 35310-2G700 |
| manufacturer | CONTINENTAL |
| system_type | Fuel Injector |
| pressure_rating | 150 bar (2175 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 10 N-m (89 lb-in) |
| high_pressure_line_torque | 25 N-m (18 lb-ft) |
| diagnostic_dtc | P0300, P0301, P0171, P0172 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 10 N-m (89 lb-in).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 25 N-m (18 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
Will part number 35310-2G700 fit my Hyundai Sonata or Kia Optima with the Theta II engine?
It is listed for Hyundai Sonata with G4KH/G4KJ engines from 2011-2019, Kia Optima with G4KH/G4KJ engines from 2011-2020, and Hyundai Santa Fe Sport with G4KH/G4KJ engines from 2013-2018. Cross references include 353102G700, 353102GGA0, FJ1189, 84212401, 353202G700, and 353202G720. Confirm the engine code and VIN fitment against the vehicle's EPC before ordering.
What are the installation torque values for this GDI injector?
The mounting/hold-down torque is 10 N·m, and the high-pressure line torque is 25 N·m. The system pressure is 150 bar. Any torque or procedure not stated here should be confirmed against the vehicle's EPC/service information.
Which diagnostic trouble codes are associated with this injector?
The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0304. These codes are diagnostic pointers only; confirm the actual cause with proper testing and the vehicle's service information.
Do I need to code or adapt the injector, and can I reuse the seals?
The supplied facts do not state coding/adaptation requirements or seal-reuse guidance for this gasoline direct-injection injector. Those points must be confirmed against the vehicle's EPC or service information rather than guessed. The listed component operates in a 150 bar system.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.