HYUNDAI 35320-2B220
High Pressure Fuel Pump Hyundai Tucson Sonata Veloster Kia Optima Forte 1.6L Gamma T GDI GDP201
35320-2B140, GDP201, HM10039, FI1532, 35320-2B130--150 bar peak rail pressureProduct Overview
The HYUNDAI 35320-2B220 is a precision automotive OE replacement component engineered specifically for Hyundai Kia 1.6L 4-Cylinder Turbo GDI Gamma (G4FJ) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Before ordering, verify that the existing diesel high-pressure common-rail pump is marked 35320-2B220 (Continental VDO) and that the drive coupling and fuel connections match your engine. Confirm application for Hyundai Sonata, Tucson, Veloster and Kia Optima/K5 with G4FD/G4FJ engines, and do not unseal the packaging until the pump part number and fitment are confirmed.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 35320-2B220 |
| oem_reference | 35320-2B220 |
| manufacturer | HYUNDAI |
| system_type | High Pressure Fuel Pump |
| pressure_rating | 150 bar (2175 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 13 N-m (115 lb-in) |
| high_pressure_line_torque | 27 N-m (20 lb-ft) |
| diagnostic_dtc | P0087, P0088, P0171, P0300 |
Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)
Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.
Installation Tips
- Depressurize the fuel system before removing the high-pressure pump.
- Clean the pump mounting area and line fittings.
- Remove the old pump and inspect the drive coupling.
- Fit new seals and install the pump with the drive coupling engaged.
- Tighten fasteners and high-pressure connections to manufacturer specifications.
- Prime the fuel circuit and check for leaks.
- Start the engine and recheck the pump and connections for leaks.
- Fit new seals whenever the high-pressure pump is installed; keep the fuel circuit clean and prime it before starting.
- This pump raises rail pressure and is driven by the timing belt/chain or camshaft, so confirm the drive coupling is fully seated.
- Check all high-pressure connections for leaks after installation.
- System pressure: 150 bar.
Frequently Asked Questions
Will this high-pressure fuel pump fit my Hyundai or Kia with the 1.6L Gamma GDI or 1.6T T-GDI engine?
This pump is listed for the Hyundai/Kia 1.6L Gamma GDI and 1.6T T-GDI engine family with G4FD or G4FJ engine codes. The listed fitments include Hyundai Sonata (2015-2019), Hyundai Tucson (2015-2021), Hyundai Veloster (2013-2020), and Kia Optima / K5 (2016-2020) with G4FD/G4FJ. Confirm the exact engine code and model year against the vehicle's EPC before ordering.
What fault codes are listed for this pump, and can they confirm the pump is failed?
The listed diagnostic trouble codes are P0300, P0087, P0193, P0089, and P0191. The listing does not provide a symptom-to-pump diagnosis procedure, so confirm the fault against the vehicle's EPC instead of guessing.
What pressure and torque specs are listed, and what about seal reuse or coding/adaptation?
This gasoline direct-injection high-pressure fuel pump is listed at 150 bar system pressure. The mounting / hold-down torque is 13 N·m, and the high-pressure line torque is 27 N·m. The listing does not state seal reuse or coding/adaptation requirements, so confirm those details against the vehicle's EPC instead of guessing.
How do I verify the old pump and cross-reference this replacement, and is a service life listed?
The part number is 35320-2B220, and the listed cross references are 353202B220, 353202B140, GDP201, HM10039, FI1532, and 353202B130. Match the old pump's part number and engine code, then confirm any remaining fitment details against the vehicle's EPC. The listing does not state expected service life, so confirm any service-life or replacement interval against the vehicle's EPC instead of guessing.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.