BOSCH 16630-1888R
High Pressure Fuel Pump Renault Megane Clio Nissan Qashqai 1.2 TCe H5Ft 0261520141
16630-00Q0D, 0261520141INTEGRATED ELECTROMAGNETIC QUANTITY CONTROL VALVE-150 bar peak rail pressureProduct Overview
The Bosch 16630-1888R (Bosch 0261520141) is a compact Bosch HDP5 mechanical high-pressure fuel pump for Renault-Nissan 1.2L TCe / DIG-T turbo engines (H5Ft, HR12DDT). It is listed for the Renault Megane IV 1.2 TCe (2016-2020), Clio IV 1.2 TCe (2013-2019) and Nissan Qashqai II 1.2 DIG-T (2014-2019). An exhaust camshaft triple-lobe drives the internal plunger to 150 bar (15 MPa / 2175 psi), with a quantity control valve of 9.5-11.5 Ω at 20°C. Flange bolts are torqued in progressive alternating steps to 11 N·m and the high-pressure pipe flare nut to 28 N·m. Common codes are P0087, P0088 and P0090. The camshaft drive bucket follower should be checked for scoring or excessive play before the pump is fitted.
Always verify the OE reference 1663000Q0D stamped on your existing pump body before ordering; confirm the pump part number and drive coupling match your engine before unsealing the packaging. 16630-1888R needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Bosch HDP5 Compact Mechanical High Pressure Fuel Pump |
| Operating PressureCore Spec | |
| Actuation Type | Exhaust camshaft dedicated triple-lobe profile driving internal plunger |
| Mounting Flange Bolt Torque | 11 N·m (progressive alternating torque steps) |
| High Pressure Pipe Torque | 28 N·m Flare Nut Connection |
| Quantity Control Valve ResistanceCore Spec | |
| Common Fault Codes | P0087 (Fuel Rail Pressure Too Low), P0088 (Pressure Too High), P0090 (Fuel Pressure Regulator Circuit) |
| Workshop Precaution | Inspect camshaft drive bucket follower for surface scoring or excessive play before installation |
Installation Tips
- Depressurize Fuel Rail & Remove Air Intake Ducting: Depressurize fuel lines via fuel pump fuse removal. Remove intake air piping and airbox assembly to access pump atop cylinder head.
- Disconnect Low Pressure Hose & Steel High Pressure Flare Nut: Disconnect low pressure rubber supply hose. Unscrew high pressure steel pipe union (28 N·m) with backup counter-wrench.
- Unfasten Mounting Bolts Evenly & Inspect Cam Tappet: Loosen two mounting bolts (11 N·m) alternately in half-turn steps to relieve spring load. Lift pump and check roller follower for wear.
- Fit New O-Ring, Torque Bolts Evenly & Test For Fuel Leaks: Install replacement O-ring with fresh engine oil coating. Torque bolts alternately to 11 N·m. Tighten steel fuel line to 28 N·m. Start engine and verify zero fuel leakage.
- Verify the part number 16630-1888R and cross references 166301888R, 1663000Q0D, 0261520141, A2820700001, and 0261520443 against the old pump before ordering.
- Torque the mounting/hold-down fasteners to 11 N·m and the high-pressure line to 28 N·m.
- Confirm fitment for the specific Renault-Nissan 1.2L TCe/DIG-T H5Ft or HR12DDT application against the vehicle’s EPC before installation.
Frequently Asked Questions
Which vehicles does this high-pressure fuel pump fit?
It fits Renault Megane IV 1.2 TCe 1.2L H5Ft Turbo 97 kW (2016-2020), Renault Clio IV 1.2 TCe 1.2L H5Ft Turbo 88 kW (2013-2019), and Nissan Qashqai II 1.2 DIG-T 1.2L HR12DDT Turbo 85 kW (2014-2019). Confirm fitment against the vehicle’s EPC before ordering.
What part number and cross references identify this pump, and how do I verify the old part?
The part number is 16630-1888R, and the listed cross references are 166301888R, 1663000Q0D, 0261520141, A2820700001, and 0261520443. Check the old pump’s markings against these references and confirm against the vehicle’s EPC before ordering.
What system pressure and installation torques apply to this pump?
System pressure is 150 bar; mounting/hold-down torque is 11 N·m and high-pressure line torque is 28 N·m. Confirm any additional installation requirements against the vehicle’s EPC before work is performed.
What diagnostic trouble codes are listed, and are coding/adaptation, seal reuse, or expected service life specified?
The listed diagnostic trouble codes are P0300, P0087, P0193, P0089, and P0191. Coding/adaptation requirements, seal reuse, and expected service life are not stated in the verified facts and must be confirmed against the vehicle’s EPC.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.