BOSCH 06H127025N
High Pressure Fuel Pump Audi A4 A5 Q5 VW Tiguan 2.0 TFSI EA888 Gen2 0261520141
06H127025M, 06H127025P, 06H127025Q, 0261520141, 0261520140, HPP0005, HM10013--150 bar peak rail pressureProduct Overview
The BOSCH 06H127025N is a factory precision fuel injection component engineered specifically for the VW Audi 2.0 TFSI EA888 Gen2 DOHC Turbocharged. Manufactured to strict original equipment tolerances, it delivers precise fuel atomization and operates up to its rated pressure of 150 bar (2175 psi). Common operational failure symptoms that point directly to this assembly include: Persistent Diagnostic Trouble Codes such as P0087, P0088, P2293, P0172 stored in the ECM. Hard cold starting, erratic idle oscillations, and severe acceleration stumbling. Unburnt fuel smell in the exhaust, black tailpipe soot, or fuel dilution in the engine crankcase. Loss of high-RPM power and engine protection limp-mode activation under highway load.
Verify the part number 06H127025N and that this high-pressure common-rail pump matches the listed engine application before ordering; confirm the pump and drive engagement match your engine before unsealing the packaging.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Volkswagen Golf VI GTI 2.0 TSI | CCTA / CAEB / CDNC | 2009-2013 |
| Audi A4 (B8) | CCTA / CAEB / CDNC | 2008-2015 |
| Audi Q5 (8R) | CCTA / CAEB / CDNC | 2009-2015 |
Technical Specifications
| Specification | Value |
|---|---|
| sku | 06H127025N |
| brand | BOSCH |
| manufacturer_code | 0261520141 |
| pressure_rating | 150 bar (2175 psi) |
| torque_flange | 20 N-m (15 lb-ft) |
| torque_line | 27 N-m (20 lb-ft) |
| engine_family | VW Audi 2.0 TFSI EA888 Gen2 DOHC Turbocharged |
Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)
Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.
Installation Tips
- Replace the pump seals with new seals before fitting.
- Mount the pump so its drive engages the camshaft or timing drive.
- Connect the pump to the high-pressure fuel circuit.
- Prime the fuel circuit before starting the engine.
- Check the fuel circuit for leaks after priming.
- Start the engine and confirm the pump raises rail pressure.
- Inspect the pump and fuel circuit for leaks after the initial run.
- Fit the pump with new seals, prime the fuel circuit, check for leaks, and confirm the pump raises rail pressure.
- Do not reuse old seals.
Frequently Asked Questions
What vehicles is part 06H127025N listed to fit?
It is listed for Volkswagen Golf VI GTI 2.0 TSI with CCTA, CAEB, or CDNC (2009-2013), Audi A4 B8 with those engine codes (2008-2015), and Audi Q5 8R with those engine codes (2009-2015). It is also listed for the Volkswagen/Audi EA888 Gen 1 & Gen 2 1.8L & 2.0L TSI/TFSI engine family.
What torque values do I need for installation?
The mounting/hold-down torque is 20 N·m, and the high-pressure line torque is 27 N·m. This gasoline direct-injection high-pressure fuel pump has a listed system pressure of 150 bar.
How can I verify the old pump before ordering?
Check the old unit against part number 06H127025N and the listed cross references: 06H127025M, 06H127025P, 06H127025Q, 0261520141, and 0261520140. If the number is not visible or fitment is uncertain, confirm it against the vehicle's EPC instead of guessing.
What diagnostic trouble codes are listed, and does this pump require coding or adaptation?
The listed diagnostic trouble codes are P0087, P0193, P0089, P0191, and P0088. Coding/adaptation requirements are not stated in the supplied facts, so confirm them against the vehicle's EPC.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.