BOSCH 04E906036E
Direct Fuel Injector Volkswagen Golf 7 Jetta Passat Tiguan Audi A3 Q3 1.4 TSI EA211 0261500354
04E906036, 0261500354, 0261500355--200 bar peak rail pressureProduct Overview
The BOSCH 04E906036E is a precision automotive OE replacement component engineered specifically for Volkswagen Audi 1.4 TSI/TFSI EA211 (CZDA, CZEA, CHPA, CPTA) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference 04E906036 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 04E906036E needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Volkswagen Golf Mk7 / Jetta / Passat / Tiguan | CZDA / CZEA / CHPA / DADA | 2013-2020 |
| Audi A3 (8V) / Q3 (8U) | CZDA / CZEA / CHPA / DADA | 2013-2019 |
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 04E906036E |
| oem_reference | 04E906036E |
| manufacturer | BOSCH |
| system_type | Fuel Injector |
| pressure_rating | 200 bar (2900 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 8 N-m (71 lb-in) |
| high_pressure_line_torque | 25 N-m (18 lb-ft) |
| diagnostic_dtc | P0300, P0301, P0172, P0087 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 8 N-m (71 lb-in).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 25 N-m (18 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
Will this injector fit a Volkswagen Golf Mk7?
This gasoline direct-injection injector, part number 04E906036E, is listed for Volkswagen Golf Mk7 / Jetta / Passat / Tiguan with engine codes CZDA / CZEA / CHPA / DADA from 2013-2020. It is also listed for Audi A3 (8V) / Q3 (8U) with the same engine codes from 2013-2019. Confirm fitment against the vehicle’s EPC before ordering.
What diagnostic trouble codes are listed for this injector?
The diagnostic trouble codes listed for this injector are P0300, P0301, P0087, P0302, and P0304. These can be used as diagnostic clues, but the provided facts do not establish expected service life or a definitive injector-only diagnosis. Confirm the diagnosis against the vehicle’s EPC and service information rather than guessing.
What are the mounting and high-pressure line torque specifications?
Mounting / hold-down torque is 8 N·m, and the high-pressure line torque is 25 N·m. These are the torque values provided for this 04E906036E gasoline direct-injection injector. Any additional procedure or specification not listed here must be confirmed against the vehicle’s EPC rather than guessed.
How can I verify the old injector before replacement?
Check the old unit against part number 04E906036E and the listed cross references: 04E906036, 0261500354, 0261500355, 04E127025B, 04E127025G. The listing identifies it as a gasoline direct-injection injector for the Volkswagen / Audi EA211 1.4L & 1.5L TSI / TFSI engine family with system pressure 200 bar. If the old part’s markings do not match, confirm against the vehicle’s EPC before ordering.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.