BOSCH 04E906036Q
High Pressure Fuel Injector VW Golf 7 Jetta Passat Audi A3 EA211 1.4 TSI
04E906036AF, 04E906036T, 0261500354, 0261500355ELECTROMAGNETIC HIGH-PRESSURE SOLENOID NEEDLE VALVE-200 bar peak rail pressureProduct Overview
The Bosch 04E906036Q is a Bosch HDEV5 direct injection multi-hole gasoline injector for Volkswagen and Audi EA211 1.4L and 1.5L TSI / TFSI engines (CZDA / CZEA / CHPA / DADA). It is listed for the Golf VII 1.4 TSI (2012-2020), Audi A3 8V (2013-2020) and Jetta 1.4 TSI (2014-2022). Direct injection rail pressure is 200 bar (20 MPa / 2900 psi), with a laser-drilled multi-hole asymmetrical spray and coil resistance of 1.5-2.0 Ω at 20°C. Fuel rail clamping bolts are specified at 9 N·m and the high-pressure feed line flare nut at 27 N·m. Common codes are P0300, P0301-P0304 and P0171. A new Teflon combustion seal ring must be installed with the VAG T10133 tool cones before reinstallation.
Always verify the OE reference 04E906036AF, 04E906036T stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 04E906036Q needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Volkswagen Golf VII 1.4 TSI | Volkswagen / Audi EA211 1.4L & 1.5L TSI / TFSI (CZDA / CZEA / CHPA / DADA) | 2012-2020 |
| Audi A3 (8V) | Volkswagen / Audi EA211 1.4L & 1.5L TSI / TFSI (CZDA / CZEA / CHPA / DADA) | 2013-2020 |
| Volkswagen Jetta 1.4 TSI | Volkswagen / Audi EA211 1.4L & 1.5L TSI / TFSI (CZDA / CZEA / CHPA / DADA) | 2014-2022 |
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Bosch HDEV5 Direct Injection Multi-Hole Gasoline Injector |
| Operating PressureCore Spec | |
| Spray Pattern | Laser-drilled multi-hole asymmetrical optimized direct spray |
| Hold-down Torque | 9 N·m Fuel Rail Clamping Bolts📐 Torque & Angle Wizard → |
| High Pressure Feed Line Torque | 27 N·m Flare Nut Connection |
| Coil Resistance | 1.5 - 2.0 Ω at 20°C (Direct peak-and-hold circuit) |
| Common Fault Codes | P0300 (Random Misfire), P0301-P0304 (Cylinder Misfire), P0171 (System Too Lean) |
| Workshop Precaution | Always install new Teflon combustion seal ring using VAG T10133 tool cones before reinstallation |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize Fuel Rail & Remove Airbox Assembly: Depressurize high-pressure fuel rail. Disconnect air cleaner housing, charge air pipes, and wiring harness connectors.
- Remove High Pressure Rail Fasteners: Remove fuel rail clamping screws (9 N·m). Pull the fuel rail assembly straight back to extract injectors from the cylinder head.
- Fit New Teflon Combustion Chamber Ring: Slide new Teflon seal over T10133 installation cone. Compress the seal with calibration sleeve T10133/3 until it fits tightly in groove.
- Torque Rail Screws & Steel Fuel Line: Push injectors into ports. Evenly tighten rail bolts to 9 N·m. Tighten high pressure pipe flare nut to 27 N·m.
- Confirm the old injector part number against 04E906036Q and the listed cross references before installation.
- Tighten the injector mounting/hold-down to 9 N·m.
- Tighten the high-pressure line to 27 N·m.
Frequently Asked Questions
Will this injector fit my Volkswagen Golf VII 1.4 TSI, Audi A3 (8V), or Volkswagen Jetta 1.4 TSI, and how do I verify the old part?
It is listed for Volkswagen Golf VII 1.4 TSI (2012-2020), Audi A3 (8V) (2013-2020), and Volkswagen Jetta 1.4 TSI (2014-2022) on the EA211 1.4L & 1.5L TSI/TFSI family (CZDA/CZEA/CHPA/DADA). Cross-check the old unit against references 04E906036Q, 04E906036AF, 04E906036T, 0261500354, 0261500355, and 04E906036AR. Confirm final fitment against the vehicle's EPC.
What symptoms or fault codes point to a failed injector?
The diagnostic trouble codes listed for this injector are P0300, P0301, P0087, P0302, and P0304. Use these codes with proper diagnosis before replacing the injector; the verified facts do not list a specific symptom or service-life interval.
What are the installation torque values and system pressure?
The mounting/hold-down torque is 9 N·m, and the high-pressure line torque is 27 N·m. This gasoline direct-injection injector is listed for a system pressure of 200 bar.
Can I reuse the seals, or does this injector require coding/adaptation?
The verified facts do not state seal-reuse or coding/adaptation requirements for this injector. Confirm those requirements against the vehicle's EPC instead of guessing.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.