Catalog / BOSCH / 06H127025K
BOSCH

BOSCH 06H127025K

View Specs
SolenoidGDI High-Pressure Fuel Pump (HPFP)Euro 5

High Pressure Fuel Pump Volkswagen Golf 6 GTI CC Passat Tiguan Audi A4 B8 A5 Q5 2.0 TSI TFSI EA888 Gen 2 0261520055

Reference data for BOSCH 06H127025K high-pressure fuel pump · OEM 06H127025Q, 06H127025P, 06H127025M, 0261520055 · Application Volkswagen / Audi EA888 Gen 1 & Gen 2 (1.8L & 2.0L TSI / TFSI CCTA / CAEB / CDNC)
OE REFERENCE06H127025Q, 06H127025P, 06H127025M, 0261520055
CONTROL VALVE-
NOZZLE-
EMISSIONEuro 5
WARRANTY12 Months
01

Product Overview

The BOSCH 06H127025K is a precision automotive OE replacement component engineered specifically for Volkswagen Audi 2.0 TSI/TFSI EA888 Gen 2 (CCTA, CBFA, CAEB, CDNC, CESA) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.

Before You Order

Verify the listed high-pressure fuel pump part number and application match your vehicle and original pump before ordering; confirm the pump drive type, mounting, and fuel line/connector fitment match. Do not order based only on appearance or cast markings.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

Primary
OEM Ref
03

Vehicle & Engine Fitment

VehicleEngineYears
Volkswagen Golf VI GTI 2.0 TSICCTA / CAEB / CDNC2009-2013
Audi A4 (B8)CCTA / CAEB / CDNC2008-2015
Audi Q5 (8R)CCTA / CAEB / CDNC2009-2015
04

Technical Specifications

SpecificationValue
part_number06H127025K
oem_reference06H127025K
manufacturerBOSCH
system_typeHigh Pressure Fuel Pump
pressure_rating200 bar (2900 psi)
operating_temperature-40°C to +135°C
flange_mount_torque20 N-m (15 lb-ft)
high_pressure_line_torque27 N-m (20 lb-ft)
diagnostic_dtcP0087, P0088, P2293, P0300

Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)

Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.

BOSCHExact Engine & Chassis Match
06H906036Q
Gasoline Direct Injection (GDI) • 150 bar
🚙 Audi A4 (B8) (CAEB)
Technical Specifications & Pinout
BOSCHExact Engine & Chassis Match
06J906036N
Gasoline Direct Injection (GDI) • 150 bar
🚙 Audi A4 (B8) (CAEB)
Technical Specifications & Pinout
BOSCHExact Engine & Chassis Match
06H906036G
Gasoline Direct Injection (GDI) • 150 bar
🚙 Engine Code CAEB
Technical Specifications & Pinout
05

Installation Tips

  1. Depressurize the fuel system before disconnecting any fuel lines.
  2. Clean the pump mounting area and fuel line fittings.
  3. Inspect the pump drive, timing belt/chain, or camshaft drive as applicable.
  4. Fit new seals to the high-pressure fuel pump.
  5. Install the high-pressure fuel pump and secure it to its mount.
  6. Reconnect the high-pressure fuel line and pump connections.
  7. Prime the fuel circuit according to the service procedure.
  8. Check the pump and fuel circuit for leaks before road test.
Tips & Warnings:
  • Use new seals, keep the fuel circuit clean, and prime the system before starting.
  • The pump raises rail pressure and is driven by the timing belt/chain or camshaft; confirm the drive type and pump application match before fitting.
  • Check for leaks after installation.
06

Frequently Asked Questions

QWill part number 06H127025K high-pressure fuel pump fit my Volkswagen or Audi?

It is listed for Volkswagen/Audi EA888 Gen 1 & Gen 2 1.8L and 2.0L TSI/TFSI applications using CCTA, CAEB, or CDNC engine codes. The listed fitments are Volkswagen Golf VI GTI 2.0 TSI 2009-2013, Audi A4 (B8) 2008-2015, and Audi Q5 (8R) 2009-2015. Confirm the exact engine code and VIN against the vehicle EPC before ordering.

QWhat diagnostic trouble codes are associated with this high-pressure fuel pump?

The verified diagnostic trouble codes listed for this high-pressure fuel pump are P0300, P0087, P0193, P0089, and P0191. No additional symptom list is provided in the verified facts, so confirm diagnosis against the vehicle EPC or service information before replacement.

QWhat are the mounting and high-pressure line torque specifications?

The mounting/hold-down torque is 20 N·m, and the high-pressure line torque is 27 N·m. This gasoline direct-injection high-pressure fuel pump is rated for a system pressure of 200 bar. Use the specified torques during installation.

QHow can I verify the old pump, and are coding/adaptation or seal reuse details available?

The listed cross references are 06H127025K, 06H127025Q, 06H127025P, 06H127025M, 0261520055, and 06H127025N; compare the old pump’s part number against these and confirm fitment via the vehicle EPC. Coding/adaptation requirements and seal reuse are not stated in the verified facts, so confirm them against the vehicle’s EPC or service information.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0088Critical

Fuel Rail/System Pressure Too High

P0089Critical

Fuel Pressure Regulator 1 Performance

P0191Critical

Fuel Rail Pressure Sensor 'A' Circuit Range/Performance

P0002High

Fuel Volume Regulator Control Circuit Range / Performance (VCV / IMV)

P0090High

Fuel Pressure Regulator 1 Control Circuit

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

COMMON RAIL WORKSHOP DIAGNOSTICS

Common Rail High-Pressure Pump Diagnostics Guide

Diagnose common rail high-pressure pump failure: suction vacuum, CP4 roller glitter, plunger wear, air ingress & P0087 hard start. Workshop bench testing.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Fuel Metering Valve (IMV/SCV) Diagnostics Guide

Diagnostic guide for common rail fuel metering valves (IMV/SCV/FCA/MPROP). Normally open vs closed, coil resistance, PWM duty cycle & P0088 / P0089 test.

Read Technical Protocol
OBD-II DIAGNOSTIC PROTOCOL

P0087 Low Rail Pressure Diagnosis Guide

Step-by-step workshop diagnostic protocol for OBD-II DTC P0087 (Fuel Rail Pressure Too Low). 5-stage troubleshooting tree: backleak testing, SCV valve, PRV valve, and high-pressure pump.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Rail Pressure Relief Valve Diagnostics Guide

Common rail pressure relief valve (PRV) testing guide. Diagnose hot start stalls, P0087 rail pressure loss, return line leakage & single vs 2-stage valves.

Read Technical Protocol