BOSCH 06H906036G
Fuel Injector VW Golf GTI CC Tiguan Audi A4 A5 Q5 2.0T TSI EA888 Gen 2 0261500076
06H906036P, 06H906036S, 06H906036E, 0261500076, 0261500162, FJ1057BOSCH HDEV5 SOLENOID HIGH-PRESSURE ACTUATOR6-Hole Precision Direct-Injection Atomization Nozzle150 bar peak rail pressureProduct Overview
The Bosch 06H906036G (Bosch production part numbers 0261500076 and 0261500162, superseding VW/Audi numbers 06H906036P, 06H906036S, and 06H906036E, aftermarket reference FJ1057) is the quintessential original equipment high-pressure solenoid gasoline direct injection (GDI) fuel injector for Volkswagen and Audi's ultra-popular 2.0-liter TSI/TFSI EA888 Generation 2 engine family. Operating at 150 bar (2,175 psi), this Bosch HDEV5 injector is standard factory equipment on millions of vehicles including the Volkswagen Golf GTI Mk6 (2010-2014), Jetta GLI, Passat CC, Tiguan, and Audi A4 B8 (2009-2016), A5 8T, Q5 8R, and A6 C7.
Always verify the original manufacturer reference stamped on your component before ordering. For 06H906036G, inspect matching OE cross-references and ensure related high-pressure seals, followers, or grommets are renewed during service.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Volkswagen Golf Mk6 / Jetta | CCTA / CAEB / CDNC | 2010-2014 |
| Volkswagen Tiguan / CC | CCTA / CAEB / CDNC | 2009-2017 |
| Audi A4 (B8) / A5 (8T) | CCTA / CAEB / CDNC | 2009-2016 |
| Audi Q5 (8R) / A6 (C7) | CCTA / CAEB / CDNC | 2011-2017 |
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Bosch HDEV5 Solenoid Gasoline Direct Injection |
| Maximum Operating Fuel Pressure | 150 bar (2,175 psi / 15.0 MPa peak operating rail pressure) |
| Coil Resistance | 1.5 - 2.5 Ohms @ 20°C (Low-Impedance Peak-and-Hold Driver) |
| Spray Geometry | 6-Hole Multi-Directional Asymmetric Cone Spray Pattern |
| Intake Manifold Securing Bolts Torque | 9 N·m (80 in-lb) evenly in criss-cross sequence |
| Fuel Rail Fasteners Torque | 9 N·m (80 in-lb) securing rail to cylinder head |
| Combustion Chamber Tip Seal | Solid White Virgin PTFE Teflon Seal Ring |
| Fuel Rail Socket Seal | High-Pressure Viton Fluorocarbon Radial O-Ring |
| Manufacturer | Robert Bosch GmbH (Tier-1 OEM for Volkswagen AG & Audi) |
| Production Reference | Bosch 0261500076 / 0261500162 / VW 06H 906 036 G |
| Operating PressureCore Spec |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Low & High Pressure System Depressurization: Disconnect low-pressure fuel pump control module plug under rear seat or pull fuse. Run engine until it stalls to deplete line pressure, then disconnect negative battery terminal.
- Intake Manifold & Throttle Body Assembly Removal: Unbolt the intake manifold support bracket, throttle body ducting, and manifold perimeter bolts (T30 Torx). Pull intake manifold backwards away from the cylinder head.
- Injector Retaining Clips & Injector Extraction: Unclip wiring harness from each injector. Use a dedicated slide-hammer injector removal tool (T10133) hooked onto the injector groove to extract stuck injectors from cylinder head bores.
- Combustion Bore Decarbonization & Teflon Resealing: Thoroughly clean carbon varnish from injector head ports using brass bore brushes. When installing new or resealed injectors, size the white virgin PTFE Teflon seal using cone and calibration die tools.
- Injector Installation, Rail Alignment & Torquing: Press injectors into the cylinder head with support washers correctly seated. Reinstall fuel rail and intake manifold, torquing manifold and rail fasteners to 9 N·m (80 in-lb).
- Verify engine code CCTA, CAEB, or CDNC and part number 06H906036G against the vehicle EPC before ordering.
- Torque the injector mounting / hold-down to 9 N·m.
- Torque the high-pressure line to 25 N·m.
Frequently Asked Questions
Which vehicles is part number 06H906036G listed for?
It is listed for Volkswagen Golf Mk6 / Jetta (2010-2014), Tiguan / CC (2009-2017), Audi A4 (B8) / A5 (8T) (2009-2016), and Audi Q5 (8R) / A6 (C7) (2011-2017) with engine codes CCTA, CAEB, or CDNC. Confirm your exact engine code and model year against the vehicle EPC before ordering.
What are the mounting and high-pressure line torque values for this injector?
The mounting / hold-down torque is 9 N·m, and the high-pressure line torque is 25 N·m. The system pressure stated for this gasoline direct-injection injector is 150 bar.
Which diagnostic trouble codes are listed for this injector, and what symptoms should I expect?
The listed DTCs are P0300, P0301, P0087, P0302, and P0304. Other failure symptoms are not stated in the verified facts, so confirm diagnosis against the vehicle EPC or service information instead of guessing.
Does this injector require coding or adaptation, and can the seals be reused?
Coding/adaptation requirements and seal reuse are not stated in the verified facts for 06H906036G. Confirm both against the vehicle EPC or service information before installation.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.