BOSCH 16600-1KT0A
High Pressure Fuel Injector Nissan X Trail Qashqai 2.0L MR20DD 0261500228
16600-4BA0A, 0261500228HIGH-SPEED ELECTROMAGNETIC MULTI-HOLE MICRO SOLENOID-200 bar peak rail pressureProduct Overview
The Bosch 16600-1KT0A (Bosch 0261500228) is a Bosch HDEV5 multi-hole direct gasoline injector for Nissan 2.0L and 2.5L direct / port injection engines (MR20DD / QR25DE / QR25DD / PR25DD). It is listed for the Nissan X-Trail T32 (2014-2021), Qashqai J11 (2014-2021) and Rogue Sport (2017-2022). Rail pressure reaches 200 bar (20 MPa / 2900 psi), with a multi-hole symmetrical spray pattern optimized for a high-tumble combustion chamber and coil resistance of 1.7-2.1 Ω at 20°C. Flanged rail bracket retaining bolts take 10 N·m and the steel delivery line flare union 26 N·m. Common codes are P0300, P0301-P0304 and P0171. Teflon combustion tip seals are not reusable, and carbon should be cleaned from the injector ports.
Always verify the OE reference 166004BA0A stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 16600-1KT0A needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Nissan X-Trail T32 | Nissan 2.0L & 2.5L Direct & Port Injection (MR20DD / QR25DE / QR25DD / PR25DD) | 2014-2021 |
| Nissan Qashqai J11 | Nissan 2.0L & 2.5L Direct & Port Injection (MR20DD / QR25DE / QR25DD / PR25DD) | 2014-2021 |
| Nissan Rogue Sport | Nissan 2.0L & 2.5L Direct & Port Injection (MR20DD / QR25DE / QR25DD / PR25DD) | 2017-2022 |
Technical Specifications
| Specification | Value |
|---|---|
| System Type | Bosch HDEV5 Multi-Hole Direct Gasoline Fuel Injector |
| Operating PressureCore Spec | |
| Spray Pattern | Multi-hole symmetrical spray pattern optimized for high-tumble combustion chamber |
| Fuel Rail Bolt Torque | 10 N·m (flanged rail bracket retaining bolts) |
| High Pressure Line Torque | 26 N·m (steel fuel delivery line flare union) |
| Coil Resistance | 1.7 - 2.1 Ω at 20°C (direct pulse solenoid circuit) |
| Common Fault Codes | P0300 (Random Misfire), P0301-P0304 (Cylinder Misfire), P0171 (System Lean) |
| Workshop Precaution | Do not reuse Teflon combustion tip seals; clean carbon accumulation from injector ports |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Relieve Fuel Line Pressure & Disconnect 12V Battery Ground: Depressurize direct injection circuit via fuel pump fuse removal. Disconnect negative battery ground.
- Remove Upper Intake Manifold Plenum & Resonator: Unbolt intake air resonator and throttle body ducting. Detach upper intake manifold plenum to access fuel rail.
- Unbolt Fuel Rail & Extract Direct Injectors: Unplug electrical connectors from injectors. Disconnect high pressure supply line (26 N·m). Remove rail mounting bolts (10 N·m) and pull injectors.
- Fit Fresh Teflon Seals, Reassemble & Torque Fasteners: Install new Teflon tip seal with calibration cone. Torque rail bolts to 10 N·m and flare fitting to 26 N·m. Start engine and check for fuel leaks.
- Verify part number 16600-1KT0A and cross references 166001KT0A, 166004BA0A, 0261500228, 166001KC0A, 166005CA0A, and 2320925010 against the vehicle’s EPC before fitting.
- Tighten the injector hold-down to 10 N·m and the high-pressure line to 26 N·m.
- Confirm coding/adaptation and seal-reuse requirements against the vehicle’s EPC before installation.
Frequently Asked Questions
Does part number 16600-1KT0A fit my Nissan X-Trail T32, Qashqai J11, or Rogue Sport?
Part number 16600-1KT0A is listed for Nissan X-Trail T32 (2014-2021), Nissan Qashqai J11 (2014-2021), and Nissan Rogue Sport (2017-2022). It is also listed for the Nissan 2.0L & 2.5L Direct & Port Injection engine family (MR20DD / QR25DE / QR25DD / PR25DD). Confirm the final application against the vehicle’s EPC.
What diagnostic trouble codes are listed for this gasoline direct-injection injector?
The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0304. The facts do not state a specific symptom-to-injector mapping; confirm any uncertain diagnosis against the vehicle’s EPC.
What installation torque and system pressure apply to this injector?
The mounting / hold-down torque is 10 N·m, and the high-pressure line torque is 26 N·m. The system pressure is 200 bar.
Does this injector require coding or adaptation after installation?
The provided facts do not state whether this gasoline direct-injection injector requires coding or adaptation. Confirm that requirement against the vehicle’s EPC before installation.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.