HITACHI 16600-4BA0A
Direct Fuel Injector Nissan Rogue Altima X Trail 2.5L QR25DE PR25DD FJ1242
16600-4BA1A, FJ1242, 842-12388, HDEV-5--150 bar peak rail pressureProduct Overview
The HITACHI 16600-4BA0A is a precision automotive OE replacement component engineered specifically for Nissan 2.5L 4-Cylinder DOHC Direct Injection (QR25DE / PR25DD) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference 166004BA1A, FJ1242, 84212388, HDEV5 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 16600-4BA0A needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 16600-4BA0A |
| oem_reference | 16600-4BA0A |
| manufacturer | HITACHI |
| system_type | Fuel Injector |
| pressure_rating | 150 bar (2175 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 10 N-m (89 lb-in) |
| high_pressure_line_torque | 25 N-m (18 lb-ft) |
| diagnostic_dtc | P0300, P0301, P0171, P0172 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 10 N-m (89 lb-in).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 25 N-m (18 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
What vehicles is this injector listed for?
It is listed for Nissan X-Trail, Qashqai and Rogue Sport applications within the specified petrol direct-injection engine family. Confirm the exact engine and vehicle application against the EPC or workshop manual before ordering.
What symptoms may point to a failed injector?
Possible symptoms include rough idle, misfire, poor running, hard starting or fuel smell. These can have other causes, so carry out diagnosis and confirm injector testing against the workshop manual before replacing.
What should I confirm before ordering?
Confirm the existing injector part number, engine family and vehicle application match the EPC or workshop manual. Also inspect connectors, seals and fuel-system condition; if any detail is unclear, verify before ordering 16600-4BA0A.
Does the replacement unit need coding or adaptation?
Coding or adaptation requirements are not stated for this unit. Confirm whether matching or adaptation is needed against the vehicle's EPC or workshop manual before installation.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.