HITACHI 16600-3TP0A
Direct Fuel Injector Nissan Altima Rogue X Trail Teana 2.5L QR25DE PR25DD 16600 EZ00A FJ1242
16600-EZ00A, FJ1242, 842-12402--150 bar peak rail pressureProduct Overview
The HITACHI 16600-3TP0A is a precision automotive OE replacement component engineered specifically for Nissan 2.5L 4-Cylinder DOHC Direct Injection QR25DE / PR25DD powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference 16600EZ00A, FJ1242, 84212402 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 16600-3TP0A needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 16600-3TP0A |
| oem_reference | 16600-3TP0A |
| manufacturer | HITACHI |
| system_type | Fuel Injector |
| pressure_rating | 150 bar (2175 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 10 N-m (89 lb-in) |
| high_pressure_line_torque | 28 N-m (21 lb-ft) |
| diagnostic_dtc | P0300, P0301, P0171, P0172 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 10 N-m (89 lb-in).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 28 N-m (21 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
Will this injector fit a 2014–2021 Nissan X-Trail T32 with the 2.5L QR25DD?
Yes, part 16600-3TP0A is listed for the Nissan X-Trail T32 with the 2.5L QR25DD from 2014 to 2021. It is also listed for the Nissan Qashqai J11 with the 2.0L MR20DD from 2014 to 2021 and the Nissan Rogue Sport with the 2.0L MR20DD from 2017 to 2022. Confirm fitment against the vehicle’s EPC before ordering.
What diagnostic trouble codes are listed for this gasoline direct-injection injector?
The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0304. No additional symptom list is provided in the verified facts, so diagnosis beyond these codes should be confirmed against the vehicle’s EPC.
What are the mounting and high-pressure line torque values for this injector?
The mounting/hold-down torque is 10 N·m, and the high-pressure line torque is 28 N·m. The system pressure stated for this gasoline direct-injection injector is 150 bar.
How can I verify that the old injector matches part 16600-3TP0A?
Check the old unit’s markings against 16600-3TP0A and the listed cross references: 166003TP0A, 16600EZ00A, FJ1242, 84212402, 166001KT0A, and 166001VA0A. If the markings do not clearly match, confirm the correct part against the vehicle’s EPC before ordering.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.