BOSCH 06L906031A
Direct Fuel Injector Volkswagen Golf GTI R Passat Audi A3 S3 A4 A5 2.0 TSI EA888 Gen 3 0261500246 FJ1213
06L906031BC, 0261500246, 0261500245, FJ1213, 06L906036K--200 bar peak rail pressureProduct Overview
The BOSCH 06L906031A is a precision automotive OE replacement component engineered specifically for Volkswagen Audi 2.0 TSI / TFSI EA888 Gen 3 (CHHB, CXDA, CYFB, DJHA) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference 06L906031BC, FJ1213, 06L906036K stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. 06L906031A needs no ECU calibration coding; no code transfer is required after fitting.
Vehicle & Engine Fitment
| Vehicle | Engine | Years |
|---|---|---|
| Volkswagen Golf Mk7/Mk7.5 | CHHB / CJXC / CYFB | 2013-2020 |
| Audi S3 (8V) / TTS (8S) | CHHB / CJXC / CYFB | 2014-2020 |
| Audi A4 (B9) / A5 (F5) / Q5 (FY) | CHHB / CJXC / CYFB | 2016-2021 |
| Porsche Macan | CHHB / CJXC / CYFB | 2015-2021 |
Technical Specifications
| Specification | Value |
|---|---|
| part_number | 06L906031A |
| oem_reference | 06L906031A |
| manufacturer | BOSCH |
| system_type | Fuel Injector |
| pressure_rating | 200 bar (2900 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 9 N-m (80 lb-in) |
| high_pressure_line_torque | 25 N-m (18 lb-ft) |
| diagnostic_dtc | P0300, P0301, P0171, P0172 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 9 N-m (80 lb-in).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 25 N-m (18 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
What vehicles is part number 06L906031A listed to fit?
It is listed for Volkswagen Golf Mk7/Mk7.5 (2013-2020), Audi S3 (8V) and TTS (8S) (2014-2020), Audi A4 (B9), A5 (F5), and Q5 (FY) (2016-2021), and Porsche Macan (2015-2021) with engine codes CHHB, CJXC, or CYFB. Confirm the exact engine code and model year against the vehicle's EPC before ordering.
What are the pressure and torque specifications for this gasoline direct-injection injector?
This gasoline direct-injection injector is listed for 200 bar system pressure. Mounting/hold-down torque is 9 N·m, and high-pressure line torque is 25 N·m. Any additional installation specifications must be confirmed against the vehicle's EPC.
Which diagnostic trouble codes are associated with this injector?
The listed diagnostic trouble codes are P0300, P0301, P0087, P0302, and P0304. These codes should be diagnosed in context, as the verified facts do not state that any one code alone confirms injector failure. Confirm further diagnosis against the vehicle's EPC.
How can I verify the old injector part number and cross references?
The primary part number is 06L906031A, and the listed cross references are 06L906031BC, 0261500246, 0261500245, FJ1213, and 06L906036K. Compare the old unit's number with these references and confirm fitment against the vehicle's EPC before ordering. Fitment must not be assumed from a cross reference alone.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.