Catalog / DENSO / PE19-20-3F0
DENSO

DENSO PE19-20-3F0

View Specs
SolenoidGDI High-Pressure Fuel Pump (HPFP)Euro 6

High Pressure Fuel Pump Mazda 3 6 CX 5 CX 9 2.0L 2.5L SkyActiv G PE01 20 3F0 GDP507

Reference data for DENSO PE19-20-3F0 high-pressure fuel pump · OEM PE01-20-3F0, GDP507, HM10046, HPP0026, PE19-20-3F0A · Application Mazda 2.0L & 2.5L SkyActiv-G / 2.5T Turbo (PE-VPS / PY-VPS / PY-VPTS)
OE REFERENCEPE01-20-3F0, GDP507, HM10046, HPP0026, PE19-20-3F0A
CONTROL VALVE-
NOZZLE-
EMISSIONEuro 6
WARRANTY12 Months
01

Product Overview

The DENSO PE19-20-3F0 is a precision automotive OE replacement component engineered specifically for Mazda 2.0L & 2.5L 4-Cylinder DOHC SkyActiv-G (PE-VPS / PY-VPS) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.

Before You Order

Confirm the Continental VDO high-pressure pump part number PE19-20-3F0 and drive coupling match your Mazda application before ordering.

Technical references: OEM service documentation, manufacturer catalogs, and field repair data.
02

Compatible Injectors

Primary
OEM Ref
03

Vehicle & Engine Fitment

VehicleEngineYears
Mazda 3PE-VPS / PY-VPS / PY-VPTS2014-2023
Mazda CX-5PE-VPS / PY-VPS / PY-VPTS2013-2023
Mazda Mazda 6 2.5PE-VPS / PY-VPS / PY-VPTS2014-2021
04

Technical Specifications

SpecificationValue
part_numberPE19-20-3F0
oem_referencePE19-20-3F0
manufacturerDENSO
system_typeHigh Pressure Fuel Pump
pressure_rating200 bar (2900 psi)
operating_temperature-40°C to +135°C
flange_mount_torque22 N-m (16 lb-ft)
high_pressure_line_torque32 N-m (24 lb-ft)
diagnostic_dtcP0087, P0088, P0171, P0300

Matched High-Pressure Fuel Injectors (Fuel Circuit Assembly)

Directly supplied by this high-pressure pump. Verify injector backleak balance if rail pressure fails to build during engine cranking.

DENSOExact Engine & Chassis Match
PE01-13-250
Gasoline Direct Injection (GDI) • 200 bar
🚙 Mazda 3 (PEVPS)
Technical Specifications & Pinout
DENSOExact Engine & Chassis Match
PY01-13-250
Gasoline Direct Injection (GDI) • 200 bar
🚙 Mazda 3 (PEVPS)
Technical Specifications & Pinout
DENSOExact Engine & Chassis Match
PY8W-13-250
Gasoline Direct Injection (GDI) • 200 bar
🚙 Engine Code PEVPS
Technical Specifications & Pinout
05

Installation Tips

  1. Depressurize the fuel system before removing the high-pressure pump.
  2. Clean the pump mounting area and fuel line connections.
  3. Inspect the drive coupling and camshaft or timing drive condition.
  4. Install the high-pressure pump using new seals.
  5. Reconnect the high-pressure fuel line and secure all fittings.
  6. Prime the fuel circuit and check for leaks.
  7. Run the engine and verify rail pressure builds correctly.
Tips & Warnings:
  • This 200 bar high-pressure common-rail pump raises rail pressure and is driven by the timing belt/chain or camshaft.
  • Fit new seals, prime the fuel circuit, and check for leaks after installation.
06

Frequently Asked Questions

QWhich vehicles and engine codes does this pump fit?

It fits Mazda 3 (2014–2023), Mazda CX-5 (2013–2023), and Mazda 6 2.5 (2014–2021) with PE-VPS, PY-VPS, or PY-VPTS engines in the Mazda 2.0L & 2.5L SkyActiv-G / 2.5T Turbo family. Cross references for comparison are PE19203F0, PE01203F0, GDP507, HM10046, HPP0026, and PE19203F0A.

QWhat diagnostic trouble codes are listed for this high-pressure fuel pump?

The listed diagnostic trouble codes are P0300, P0087, P0193, P0089, and P0191. No symptom list is provided in the verified facts, so use these codes as diagnostic leads and confirm pump failure with the vehicle’s service information.

QWhat are the mounting/hold-down and high-pressure line torque values?

The mounting/hold-down torque is 22 N·m. The high-pressure line torque is 32 N·m.

QDoes this pump require coding/adaptation, and can the seals be reused?

The verified facts do not state coding/adaptation or seal-reuse guidance for PE19-20-3F0. Confirm both against the vehicle’s EPC or service information before installation.

07

Diagnostic Trouble Codes & Fault Protocols

Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:

P0087Critical

Fuel Rail/System Pressure Too Low

P0088Critical

Fuel Rail/System Pressure Too High

P0089Critical

Fuel Pressure Regulator 1 Performance

P0191Critical

Fuel Rail Pressure Sensor 'A' Circuit Range/Performance

P0002High

Fuel Volume Regulator Control Circuit Range / Performance (VCV / IMV)

P0090High

Fuel Pressure Regulator 1 Control Circuit

08

Cross-Reference & Compatibility

Sister parts, same-platform variants, and known incompatibilities.

Technical Diagnostic & Service Protocols

Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.

COMMON RAIL WORKSHOP DIAGNOSTICS

Common Rail High-Pressure Pump Diagnostics Guide

Diagnose common rail high-pressure pump failure: suction vacuum, CP4 roller glitter, plunger wear, air ingress & P0087 hard start. Workshop bench testing.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Fuel Metering Valve (IMV/SCV) Diagnostics Guide

Diagnostic guide for common rail fuel metering valves (IMV/SCV/FCA/MPROP). Normally open vs closed, coil resistance, PWM duty cycle & P0088 / P0089 test.

Read Technical Protocol
OBD-II DIAGNOSTIC PROTOCOL

P0087 Low Rail Pressure Diagnosis Guide

Step-by-step workshop diagnostic protocol for OBD-II DTC P0087 (Fuel Rail Pressure Too Low). 5-stage troubleshooting tree: backleak testing, SCV valve, PRV valve, and high-pressure pump.

Read Technical Protocol
COMMON RAIL WORKSHOP DIAGNOSTICS

Rail Pressure Relief Valve Diagnostics Guide

Common rail pressure relief valve (PRV) testing guide. Diagnose hot start stalls, P0087 rail pressure loss, return line leakage & single vs 2-stage valves.

Read Technical Protocol