DENSO PY01-13-250
Direct Fuel Injector Mazda 3 6 CX 5 CX 9 2.5L SkyActiv G PY VPS FJ1254
PY01-13-250A, FJ1254, 842-12390--200 bar peak rail pressureProduct Overview
The DENSO PY01-13-250 is a precision automotive OE replacement component engineered specifically for Mazda 2.5L 4-Cylinder DOHC SkyActiv-G (PY-VPS / PY-VPTS) powertrains. Designed to deliver consistent calibration and factory-specified fuel atomization, this unit restores original throttle response, diagnostic rail pressure stability, and emission compliance.
Always verify the OE reference PY0113250A, FJ1254, 84212390 stamped on your existing injector body before ordering; confirm the engine code and injector part number on the unit body both match your vehicle before unsealing the packaging. PY01-13-250 needs no ECU calibration coding; no code transfer is required after fitting.
Technical Specifications
| Specification | Value |
|---|---|
| part_number | PY01-13-250 |
| oem_reference | PY01-13-250 |
| manufacturer | DENSO |
| system_type | Fuel Injector |
| pressure_rating | 200 bar (2900 psi) |
| operating_temperature | -40°C to +135°C |
| flange_mount_torque | 10 N-m (89 lb-in) |
| high_pressure_line_torque | 26 N-m (19 lb-ft) |
| diagnostic_dtc | P0300, P0301, P0171, P0172 |
Matched High-Pressure Fuel Pump (Fuel Circuit Assembly)
Operates on the same high-pressure rail circuit. When troubleshooting low rail pressure (DTC P0087), verify pump volumetric delivery before replacing injectors.
Installation Tips
- Depressurize the fuel system completely via diagnostic scan tool or by removing the fuel pump fuse prior to line disassembly.
- Clean all surrounding bracket areas thoroughly using residue-free brake cleaner to prevent abrasive particulate ingress.
- Inspect the mechanical camshaft lobe and roller follower or clean injector bore seating surfaces before hardware alignment.
- Install component using fresh factory O-rings or Teflon combustion chamber seals lubricated only with clean motor oil.
- Torque mounting flange fasteners in alternating increments to 10 N-m (89 lb-in).
- Torque high-pressure hydraulic tube fittings using a calibrated flare nut wrench to 26 N-m (19 lb-ft).
- Prime low-pressure fuel circuit, cycle ignition key 3-4 times, and inspect for high-pressure hydraulic leaks before road test.
- Always replace single-use high-pressure metal fuel lines and micro-filter seals whenever disconnected.
- Verify camshaft driving lobe surfaces for scoring or flat spots before installing any mechanical pump.
- Reset long-term and short-term fuel trim adaptations via OBD-II diagnostic scanner after physical replacement.
Frequently Asked Questions
Will part number PY01-13-250 fit my Mazda?
It fits Mazda 3 (2014–2023), Mazda CX-5 (2013–2023), and Mazda 6 2.5 (2014–2021) with the PE-VPS, PY-VPS, or PY-VPTS engine family. This is the 2.0L & 2.5L SkyActiv-G / 2.5T Turbo gasoline direct-injection injector. Confirm the exact vehicle application against the vehicle’s EPC before ordering.
What torque values are required for installation?
The mounting / hold-down torque is 10 N·m, and the high-pressure line torque is 26 N·m. The system pressure is 200 bar. Confirm any additional installation details against the vehicle’s EPC.
What diagnostic trouble codes are listed for this injector?
The listed DTCs are P0300, P0301, P0302, P0304, and P0087. The provided facts do not include other symptom descriptions, so confirm diagnosis against the vehicle’s EPC.
How can I verify the old injector before replacement?
Compare the old unit’s markings with part number PY01-13-250 and the cross references PY0113250, PY0113250A, FJ1254, 84212390, and PY8W13250. If the markings do not match, confirm fitment against the vehicle’s EPC instead of guessing.
Diagnostic Trouble Codes & Fault Protocols
Common diagnostic trouble codes (DTCs) triggered when this common rail injector experiences wear, circuit faults, or calibration drift:
Random or Multiple Cylinder Misfire Detected
Cross-Reference & Compatibility
Sister parts, same-platform variants, and known incompatibilities.
Technical Diagnostic & Service Protocols
Authoritative field procedures, diagnostic testing thresholds, and service SOPs for this assembly.